Hemi Tuning

[MacedoMS]

How does one go about being accepted for BETA testing? I personally own (2) Hemi powered vehicles and have a client list itching for tuning.

[FSTRK]

Yes, a full tuning solution is GREATLY needed. I'd like to be able to tune the electronic throttle control curve, as it sucks bad, especially once you run forced induction. Full fuel and timing map control of course is the greatest need, with transmission shift points another big one. And the easier details like secondary o2 sensor delete, speed and rev limiter increase, etc.

Of course you guys know all of this better than me, but there is a large market for this product and especially now with several engine buildups in the works and these motors being dropped into older muscle cars, etc... items such as reworked heads, camshafts, increased/decreased compression ratios, all are begging for a solution such as this.

Those of us wanting to run turbo/supercharged have had to learn to become ameteur fuel injection tuning techs just to get our trucks drivable. Let's just say that the day you release a full PCM edit tuning solution I'll be happy to host the keg party

So since I haven't seen any new posts for awhile in this thread I thought I'd say something to hopefully keep the information stream coming, anything you guys can let us know on where the process is at would be wonderful

[MrDestinE]

I am keeping an eye peeled in here as well!!!

TJ

[Animal451]

I'm patiently waiting for this. I want ported heads and a cam but until I can tune the PCM, there's little point in going much further with my Charger.

If HP Tuners need a car to work with, I'll drive down tomorrow and drop it off, just say the word . . .

[kkd60]

throw me in also.

[n2oHEMI]

Very Very interested also, i have a big cam waiting for a good tune program
I really dont want to go the smt6 route

[broc2238]

I will wait patiently until something is developed for us

[MyGoatBites]

There are a LOT of guys waiting in the wings for the Hemi tuning solutions!

[lafrad]

I am waiting... with uneasy patience... for the first tuning solution to be come available

My HEMI NEEDS to be unleashed from the stock ECM!

[Night Moves II]

How many thousands of Hemi owners do you think are waiting for custom tuning??? Gee...I wonder what that would calculate into in terms of PROFIT!!! I know I'm in line.

[FTI-EDC]

So many camshafts planned and no tuning....

[Night Moves II]

There are probably thousands of people who have their plans on hold waiting for this tuning which we heard would be available late last year. Well...2007 is almost half over!! I guess we Mopar owners are low on the priorty list even though we were the first to bring back the rear wheel drive muscle cars. Go figure!!

[Bill@HPTuners]

I guess we Mopar owners are low on the priorty list even though we were the first to bring back the rear wheel drive muscle cars. Go figure!!

Na we just hit a few bumps in the road...hopefully will be clear sailing from here.

[Night Moves II]

We can only hope we see something before the end of this race season.

[lafrad]

Na we just hit a few bumps in the road...hopefully will be clear sailing from here.

Oh I SO HOPE this is true

[WickedSRT8]

Na we just hit a few bumps in the road...hopefully will be clear sailing from here.

That is awesome....

I am just a single enthusiast that will purchase one for personal use... sure, expensive, but don't care. You guys have demonstrated quality in the past, and I have no problem paying for quality...

SWEET!!

[lafrad]

Just a *bump* to keep the topic alive...

[uarperformance]

So Bill. Is it possible by year end for us mopar guys. Or due I just GM it. Have 2 chyslers of my own. Nitrous assited 06 charger. Have been waiting to install mopar performance CNC heads, kooks LT,& stroker short block. Should I dump my parts & start buying my LS2 stuff?

[glhs502]

Hey with gas at $3/gal most of us will use the HP tuner to get better MPG for our Dodge trucks..

[LS1 Pontiac GTO]

Any ETA on support for the SRT-8's 6.1 Hemi?