Figured I would go ahead an ask......Anyone have access to a LT4 A8 Z06 file??
Figured I would go ahead an ask......Anyone have access to a LT4 A8 Z06 file??
Email Tunes, [email protected]
96 TA Blown/Stroked, 4L80E/Fab 9
15 C7 A8 H/C 2.3 Blower/PI
14 Gen 5 Viper
Custom Mid Engine chassis, AKA GalBen C
Have not seen one roll through our dealership yet will be on the look out for one
Bump....
I have one but not much to look at on the trans side
You need to get the latest 2.25. Some torque management parameters have been added. TCC lockup/release and desired shift speed is coming next.
Lt1 post it if you don't mind, thrre is bother tables I'm interested in
I pulled it with Mondays beta. Will grab todays.Originally Posted by Engineer@HPT
LT1Z you going to post that file?
Email Tunes, [email protected]
96 TA Blown/Stroked, 4L80E/Fab 9
15 C7 A8 H/C 2.3 Blower/PI
14 Gen 5 Viper
Custom Mid Engine chassis, AKA GalBen C
It's not a Z06 but this Stingray has a A8
I have a 15 A8 stingray, but thanks for sharing
I'm going to the ncm bash Friday, I'll try to get one there
What do you expect to see different on a Z06 A8? I would think the A8 Z06 would have the same OS as the stingray.
The main thing is the driver demand table. In 2015 the GM calibrators changed these tables from kW to Axle Tq. The values are quite a bit different and I'm just curious how these tables are populated for the z06 A8.
Cool if you find a tune before me please post it thanks
Mike
Will have a 2016 A8 version (with updates?) to post in a couple of months.
Last edited by jim2092; 04-27-2015 at 07:14 PM.
SOLD - 2005 C6 6.0 LS2,TF 235 heads, 245/255 .630 113 LSA cam, LS7 lifters, YT 1.7 RR, FAST 102 LSXR, VMax 90-102mm, VMax CNC ported TB, LS7 injectors, Dewitts radiator, Manley 7.550 pushrods, LS7 fuel pump, PowerBond 25% UD pulley, RPM stage 2 '06+ 4:10 rear end, Callaway CAI, 160* thermostat, HP Pro custom tune, LG Pro headers
Now - 2016 C7 ZO6 A8
Cant find oil temps and some other parameters on my 2015 Z06
Anyone have a configuration file with all this?
You have an A8 or M7?
I have a M7
Engineer@HPT posted that the latest 2.25 has some new parameters regarding torque management. Since this is a A8 thread, I assumed he was talking the TM for the transmission.
Anyway, I have downloaded the latest version (2.25.2007 beta) and opened with the file from my 2015 Stingray with A8. I still only see three parameters, like it always has been. Am I missing something?
Maybe try reading the entire file out of the vehicle again?
www.crawford-racing.com
Home of the original and best selling CR-Fueler plug and play port injection controller kits for all GM Gen V direct injection platforms.
Reply With Quote