Results 1 to 12 of 12

Thread: Beta Tester Needed : Someone with access to a Boss 302 w/ FRPP Track Key Calibration

  1. #1
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,324

    Beta Tester Needed : Someone with access to a Boss 302 w/ FRPP Track Key Calibration

    Need someone to test out a file for me. If things go as planed, we will be finally supporting all the FRPP calibrations which currently NO ONE supports. :-)
    Eric Brooks
    HP Tuners, LLC

  2. #2
    Advanced Tuner
    Join Date
    Aug 2009
    Location
    Naples, FL
    Posts
    341
    Taking the Ford market by storm!! This is, has been, and will continue to be an absolute thrill to watch. Great job HPt!!!

    But sadly no I don't have access to one currently.

  3. #3
    Senior Tuner
    Join Date
    Jan 2015
    Location
    Franklin, NC / Gainesville, Ga
    Posts
    3,937
    Got one sitting in the shop right now that I've already tuned with roush stage 1 kit with sct. BUT the track key has already been turned off in the calibrations. Not sure if your aware or not, but serious problems can occur by flashing incorrectly with track keys present. Ahhh, you know that, but to the others out there who don't - can leave you pulling your hair out. If your interrested let me know. THAT would be so freakin awesome if you came up with a way to flash a seperate program in for the track key

    I'm also friends with one of roush's most recommended tuners, but I don't think he has hp
    2010 Vette Stock Bottom LS3 - LS2 APS Twin Turbo Kit, Trick Flow Heads and Custom Cam - 12psi - 714rwhp and 820rwtq / 100hp Nitrous Shot starting at 3000 rpms - 948rwhp and 1044rwtq still on 93
    2011 Vette Cam Only Internal Mod in stock LS3 -- YSI @ 18psi - 811rwhp on 93 / 926rwhp on E60 & 1008rwhp with a 50 shot of nitrous all through a 6L80

    No Longer with passion performance auto for good reasons

  4. #4
    Senior Tuner
    Join Date
    Jan 2015
    Location
    Franklin, NC / Gainesville, Ga
    Posts
    3,937
    Eric, it just dawned on me. Do you just need the ecm cal id with the track key setup in it? I do have that saved somewhere if you just need that. Think it was some weird wx or something of that nature cal? Will have to check Monday if I get a chance.
    2010 Vette Stock Bottom LS3 - LS2 APS Twin Turbo Kit, Trick Flow Heads and Custom Cam - 12psi - 714rwhp and 820rwtq / 100hp Nitrous Shot starting at 3000 rpms - 948rwhp and 1044rwtq still on 93
    2011 Vette Cam Only Internal Mod in stock LS3 -- YSI @ 18psi - 811rwhp on 93 / 926rwhp on E60 & 1008rwhp with a 50 shot of nitrous all through a 6L80

    No Longer with passion performance auto for good reasons

  5. #5
    Senior Tuner
    Join Date
    Jan 2015
    Location
    Franklin, NC / Gainesville, Ga
    Posts
    3,937
    You probably want the whole cal as pulled out with hp. But if you don't this is some of the cheat sheet I use when dealing with Fords.
    MBTKAC5 FRPP Track Key Ford Racing 2011-2012
    FGDX2S6 GT500 FRPP Whipple 2.9L 123mm MAF Ford Racing 2011-2012 use this directly on a GT500
    FPDW252 Roush TVS Roush 2011-2012 use this directly on blower cars, speed density
    KTCX2CY Roush F150 TVS Roush F150 2012
    BBHS0K6 Roush Raptor Roush Raptor 2012
    XAX40_SCCJ_13 Super Cobra Jet Blower Ford Racing Mustang 2013
    X0ACZ2R1 Cobrajet 140mm MAF 2010
    2010 Vette Stock Bottom LS3 - LS2 APS Twin Turbo Kit, Trick Flow Heads and Custom Cam - 12psi - 714rwhp and 820rwtq / 100hp Nitrous Shot starting at 3000 rpms - 948rwhp and 1044rwtq still on 93
    2011 Vette Cam Only Internal Mod in stock LS3 -- YSI @ 18psi - 811rwhp on 93 / 926rwhp on E60 & 1008rwhp with a 50 shot of nitrous all through a 6L80

    No Longer with passion performance auto for good reasons

  6. #6
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,324
    I have all of the calibrations already. I need someone with a car that is using these specific calibrations, to test them after flashing.

    Currently if you modify a track key calibration, or the other later FRPP calibrations, the throttle is limited to 20 degrees.
    Eric Brooks
    HP Tuners, LLC

  7. #7
    Any update??

  8. #8
    Advanced Tuner
    Join Date
    Sep 2010
    Posts
    869
    Track key support was released ages ago...If you have a red key boss, you will see new track key tabs in your engine section...they have their own dedicated tabs

  9. #9
    Potential Tuner
    Join Date
    Dec 2018
    Posts
    3
    I'm working with Eric to get the Track Cal done as well. Similar to the red key but for 13/14 GT Manual cars.

  10. #10
    Potential Tuner
    Join Date
    Jan 2020
    Location
    WI
    Posts
    1
    Any update on this for the 13/14 Track cal?

  11. #11
    I?m curious as well. I have a 2013 Boss with Track Key. About to purchase HP Tuner and would love to know if I can keep my Track Key active.

  12. #12
    Tuner
    Join Date
    Jun 2012
    Location
    Canada
    Posts
    153
    Quote Originally Posted by Eric@HPTuners View Post
    I have all of the calibrations already. I need someone with a car that is using these specific calibrations, to test them after flashing.

    Currently if you modify a track key calibration, or the other later FRPP calibrations, the throttle is limited to 20 degrees.

    I was not aware of the track key issues. to clarify car need to be tuned without track key present? Does this issues only relate to 2011 -2012?