VCM Scanner 2.25 Beta Now Available

[Keith@HPTuners]

Just published, 2.25.1845

Please note that this will be updated daily and many features are still in development. Much of the list below should be done relatively quickly. I'll try to update this thread as items are completed.

Please keep all feedback, comments, questions, etc.. inside this thread for now.

Current major developments pending:
Open/Save of all configs/layouts
Support for 2.24 log files
Functional Graph (Histogram) Display
Functional VCM Controls Display
Functional DTC Display
GM LS1 based RTT
User Math Parameters
MPVI A/D Inputs
MPVI Output Controls
MPVI Standalone Datalogging

Extended broadcast parameters for Ford
Fast scanning data methods for Ford

Any broadcast parameters for Dodge
Fast scanning data methods for Dodge

[MikeOD]

How do I insert the banana dance smiley!!!!

Thank you!!!

[toyoguru]

Great news!, can't wait to give the new scanner a try on my 15

[Brice]

Hell Yeah !

nice usefull user interface and a lot a nice feature ... wait Bluetooth/wifi interface (hum ... racerender convergence)?

[gofastwclass]

Sweet! Thanks again Keith and the rest of the team.

[txcharlie]

Awesome news!!

[Wingman520]

I can't wait to try this

[TobyG]

where do we download it?

[TobyG]

Found it, was hidden

[bluegoat06]

Is this an email away from support or downloadable from our personal customer links?

[schpenxel]

Is this an email away from support or downloadable from our personal customer links?

Email support.

My biggest annoyance so far is there's no way I've found to auto setup histogram axis's to match break points found in VCM editor. Certainly that can be worked around but the old way of doing it worked for me

[Yortt]

Found it, was hidden

Care to share where you found it

[jarrah]

Do we have the access on doing throttle relearn on Vipers

[Keith@HPTuners]

Email support.

My biggest annoyance so far is there's no way I've found to auto setup histogram axis's to match break points found in VCM editor. Certainly that can be worked around but the old way of doing it worked for me

The editor already allows you to copy the table axis to clipboard, which you can then paste into vcm scanner.

I do plan to add another copy function in editor like "Copy for VCM Scanner", and then in vcm scanner, a "Paste from VCM Editor"

[jarrah]

The editor already allows you to copy the table axis to clipboard, which you can then paste into vcm scanner.

I do plan to add another copy function in editor like "Copy for VCM Scanner", and then in vcm scanner, a "Paste from VCM Editor"

keith,

R we able to do throttle relearn for vipers and can we log maf volts.

Thank u

[Keith@HPTuners]

MAF volts should be in there for gen4 vehicles.

Throttle learn isn't in there yet. When it gets added, you'll find it under Vehicle->Controls & Special Functions.

[schpenxel]

The editor already allows you to copy the table axis to clipboard, which you can then paste into vcm scanner.

I do plan to add another copy function in editor like "Copy for VCM Scanner", and then in vcm scanner, a "Paste from VCM Editor"

Ok, I'll use that way instead. Not sure how I missed that.. I thought you either had to copy/paste the whole table (with headers) or just the data, but being able to just copy paste headers isn't so bad

I also very much like the search feature for finding PID's

[jarrah]

MAF volts should be in there for gen4 vehicles.

Throttle learn isn't in there yet. When it gets added, you'll find it under Vehicle->Controls & Special Functions.

I am tuned a gen5 one two weeks back keeps going into limp mode.....i wld like to call the guy for a retune to reslove this issue i think it needs throttle relearn and if maf volts it wld be great to log maf err vs volts

[Higgs Boson]

Is the formatting fixed? Whenever I tried that in the past it is spaced wrong and requires manual reconfiguration.

[schpenxel]

Is the formatting fixed? Whenever I tried that in the past it is spaced wrong and requires manual reconfiguration.

Appears to have worked fine for me