-
Tuner in Training
93 silverado 6.2m5 swap need help finding vats delete switch
im stuck any help is appreciated
-
Tuner in Training
ive looked in engine, engine diag and in systems and cant find a vats enable/disable switch anywhere
-
Tuner in Training
ive read entire and done the write entire also and still its not popping up
-
Tuner in Training
I should also post that im using an 07 harness and pcm from a Silverado 5.3 because the pcm used prior to this swap was locked out by lsedit
-
Click on the OS tab. And a Write Entire is required after you disable it.
-
Tuner in Training
When I click on hp os it has 5 tabs but none are highlighted and all say not available to the right of them
-
Tuner in Training
Below it does say a write entire must be performed for these changes to take effect
-
Tuner in Training
This is the first timed I've ever been stumped and it's killing me
-
Edit>View - make sure Advanced is selected then look in the OS Tab again. VATS will not show up under Basic view. This is assuming you are using a 07 E38 and not a 07 Classic P59 since it is running a 6.2L.
-
Tuner in Training
That I'm not sure of, I'll have to go look at my receipt from the salvage yard to see what it says
-
Tuner in Training
Firing up my laptop to try your suggestion now brb
-
Tuner in Training
It is an e38 according to the file and your idea worked man, it showed up immediately, thanks a bunch. I was really not wanting to buy a new definition file for CATS
-
Tuner in Training
Thanks a lot bud I appreciate it
-
You're lucky to have CATS. I have it too.