Results 1 to 4 of 4

Thread: unable to locate interface error

  1. #1
    Potential Tuner
    Join Date
    Apr 2015
    Posts
    2

    unable to locate interface error

    Seams as if my computer dosent recognize my interface. It was working fine on sunday April 6th. Nothing changed with my computer (windows 7 x64). Now there are no drivers in the device manager and windows dosent see the interface (no noises when plugging in and unplugging) also tried using a windows xp computer and the same problem occurs. I checked all fuses and power at aldl with test light to find no problems.
    Any help is appreciated.
    Thanks in advance.

  2. #2
    Advanced Tuner
    Join Date
    May 2010
    Location
    Behind the wheel
    Posts
    272
    Have you tried a different USB cable between the interface and PC?

  3. #3
    Potential Tuner
    Join Date
    Apr 2015
    Posts
    2
    Yes i have tried 2 different cables on both computers to no avail.

  4. #4
    Tuner in Training
    Join Date
    Aug 2008
    Location
    Irvine
    Posts
    39
    Did you recently install a later release of VCM Editor? I had the same problem, installed the latest release and all was OK