I got the engine running and idling. Test drove several times logging for VE tables first. Maf is failed. I?ve removed a bunch out of the VE Table around the idle region. I aim still getting 18-25% LTFT at idle. It is a brand new build bottom up. Had the block done .10 over. And new cam lifters, heads resurfaced and valve seats cut. This is the first truck I?ve tried tuning myself. I?ve done tuning training and watched about every YouTube video on tuning for cam swaps and idle air flow. I will post a log when I get back home from work and the tune. Any insite Is appreciated.