Hey guys,
What setting causes the raised idle speed during warm up?
All the temp based adders appear to be zero'd out of the box. I'm not necessarily wanting to change it, just curious as to what makes it tick.
Cheers
Hey guys,
What setting causes the raised idle speed during warm up?
All the temp based adders appear to be zero'd out of the box. I'm not necessarily wanting to change it, just curious as to what makes it tick.
Cheers
Last edited by timwds; 05-19-2015 at 05:45 PM. Reason: typo
Raised high what mate?
Ford BF Turbo Ute,Stock head/cams, In house built bottom end,Atomic Springs, Forged Rods,Cosworth Pistons,Atomic Billet oil pump gears,ARP Head/mainstuds,Process West Stage 3 Cooler Kit- Plazmaman plenum,Precision Int.Gate 6466,Manta twin 3" exhaust,ID1000s Plazmaman surge with Holley 12-1800 pump, Home Built ZF6H26, On United Pump E85 499rwkw 10.5@135mph https://www.youtube.com/watch?v=dgZupPhrMss
Latest mods, FG intake manifold conversion and ID1300s-500rwkw, Yet to see the 1/4Mile
BA have a ECT and IAT. BF its oil temp. The table probably isn't defined in HPT?
Put it in that missing parameters thread!!! It's a must have for BF's when altering idle speed!!
This ^
Ford BF Turbo Ute,Stock head/cams, In house built bottom end,Atomic Springs, Forged Rods,Cosworth Pistons,Atomic Billet oil pump gears,ARP Head/mainstuds,Process West Stage 3 Cooler Kit- Plazmaman plenum,Precision Int.Gate 6466,Manta twin 3" exhaust,ID1000s Plazmaman surge with Holley 12-1800 pump, Home Built ZF6H26, On United Pump E85 499rwkw 10.5@135mph https://www.youtube.com/watch?v=dgZupPhrMss
Latest mods, FG intake manifold conversion and ID1300s-500rwkw, Yet to see the 1/4Mile
Noob question: Where is this thread you speak of?
HACCKFB (BF1 FPV) has it mate. Get onto Eric as it's a must have
04 Velocity MKII M6 & 06 BF F6 555 ZF6
I have those tables. I thought there might have been an adder somewhere else as it idles slightly higher when cold but those tables show fixed idle speeds.
There are multiple adders
04 Velocity MKII M6 & 06 BF F6 555 ZF6
All adders are zero. This is a stock tune.
idle.png
You're missing the oil temp adder which is the only active one in a stock BF tune!