Page 5 of 9 FirstFirst 123456789 LastLast
Results 81 to 100 of 163

Thread: VCM Scanner 2.25 Ford Tips

  1. #81
    Senior Tuner
    Join Date
    Apr 2005
    Location
    Sugar Land, TX
    Posts
    1,198
    Quote Originally Posted by Eric@HPTuners View Post
    Manifold Charge Temp is IAT2 and it has already been added.
    Thanks! I'll have to log MCT. Wonder why it and IAT2 are both in the drop down selection of PIDs.

  2. #82
    Potential Tuner
    Join Date
    Jul 2015
    Posts
    9
    Thank you I'll wait

  3. #83
    Advanced Tuner
    Join Date
    Nov 2007
    Posts
    232
    Just started REALLY using 2.25 scanner. I've dabbled with it briefly in the past only to find it wasn't working on this or that. Only thing about it I'm not totally keen on is after a log having to close out the log then re-open it. Everything else about it seems pretty frickin fantastic.
    "I didn't fail, I just found 100 ways to do it wrong." - Benjamin Franklin

  4. #84
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,409
    Quote Originally Posted by schaid View Post
    Just started REALLY using 2.25 scanner. I've dabbled with it briefly in the past only to find it wasn't working on this or that. Only thing about it I'm not totally keen on is after a log having to close out the log then re-open it. Everything else about it seems pretty frickin fantastic.
    I'm sure this will be addressed soon.

  5. #85
    Tuner in Training
    Join Date
    Feb 2009
    Posts
    20
    DO the histogram/graphs work in 2.25. Someone had asked a few weeks ago but I haven't seen an answer.

  6. #86
    Any update on when we'll be able to log external inputs (wideband)?

  7. #87
    Tuner
    Join Date
    Apr 2015
    Location
    CO
    Posts
    99
    Quote Originally Posted by bewarechevette View Post
    DO the histogram/graphs work in 2.25. Someone had asked a few weeks ago but I haven't seen an answer.
    Graphs do.

  8. #88
    Tuner in Training
    Join Date
    Feb 2009
    Posts
    20
    Quote Originally Posted by esacteksab View Post
    Graphs do.
    Thanks, so that means I am just doing something wrong

  9. #89
    any update on when the spanish oak ECM knock DMRs will be supported?
    2007 Mustang GT
    305ci big bore (5.0L Cammer block)
    Ported heads
    Lunati cams and springs
    Usual compliment of bolt-ons

  10. #90
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,409
    Quote Originally Posted by csracing View Post
    any update on when the spanish oak ECM knock DMRs will be supported?
    The functionality was just added,now it is up to us to add the parameters parameters to each OSID. Won't be long

  11. #91
    Thanks
    2007 Mustang GT
    305ci big bore (5.0L Cammer block)
    Ported heads
    Lunati cams and springs
    Usual compliment of bolt-ons

  12. #92
    Quote Originally Posted by Eric@HPTuners View Post
    The functionality was just added,now it is up to us to add the parameters parameters to each OSID. Won't be long
    Sweet!!!!
    Previous
    2007 Mustang GT w/ Whipple supercharger
    2013 Focus ST
    2016 Volkswagen GTI

    Current
    2019 Golf R

  13. #93
    Advanced Tuner
    Join Date
    Nov 2007
    Posts
    232
    Quote Originally Posted by bewarechevette View Post
    DO the histogram/graphs work in 2.25. Someone had asked a few weeks ago but I haven't seen an answer.
    You have to close the log then reopen it and the graphs populate with the data.
    "I didn't fail, I just found 100 ways to do it wrong." - Benjamin Franklin

  14. #94
    Tuner in Training
    Join Date
    Feb 2009
    Posts
    20
    [QUOTE=schaid;398928]You have to close the log then reopen it and the graphs populate with the data.[/QUO

    Thank you very much for that info!

  15. #95
    Advanced Tuner bbrooks98's Avatar
    Join Date
    Oct 2011
    Location
    Gainesville, VA
    Posts
    301
    Can we add injector pulse width for FPDL5A2? Would be nice to know the duty cycle.

    Thanks!

  16. #96
    Advanced Tuner AKDMB's Avatar
    Join Date
    Sep 2014
    Location
    NC
    Posts
    344
    Hey Eric, is the MAF Period PID supported in strategy FMDN1AM? I can't get the MAF Period PID to show up in the channels. I deleted my vehicle in the VCM Scanner vehicle folder and I picked up an extra MAF PID, but not the one I needed. Any idea's?
    Also, I can't add any of the generic PID's in the channels either.

    I don't know if this has anything to do with it, but the car is a 2012 3.7 V6 Mustang manual transmission with factory performance pack so it has an extra traction control setting ("Sport Mode"), different wheel and tire size as well as 3.31's instead of 2.73's on the base model 3.7 V6 Mustangs.

  17. #97
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,409
    Quote Originally Posted by AKDMB View Post
    Hey Eric, is the MAF Period PID supported in strategy FMDN1AM? I can't get the MAF Period PID to show up in the channels. I deleted my vehicle in the VCM Scanner vehicle folder and I picked up an extra MAF PID, but not the one I needed. Any idea's?
    Also, I can't add any of the generic PID's in the channels either.

    I don't know if this has anything to do with it, but the car is a 2012 3.7 V6 Mustang manual transmission with factory performance pack so it has an extra traction control setting ("Sport Mode"), different wheel and tire size as well as 3.31's instead of 2.73's on the base model 3.7 V6 Mustangs.
    Not done with all the ESYS definitions, but it's coming.
    Eric Brooks
    HP Tuners, LLC

  18. #98
    Advanced Tuner AKDMB's Avatar
    Join Date
    Sep 2014
    Location
    NC
    Posts
    344
    Thanks for the reply, I guess I will download the latest copy of 2.24 and create a custom PID. I pretty much have everything else I need to dial the car with 2.25.
    Last edited by AKDMB; 10-05-2015 at 02:08 PM.

  19. #99
    Tuner in Training
    Join Date
    Nov 2011
    Posts
    44
    Setup my tune per coyote cookbook. Logging to dial in maf and the scanner isn't picking up ltft's. Any reason to this? I'm logging ltft bank 1 sae and same for bank 2. It's a 14 gt

  20. #100
    Tuner in Training
    Join Date
    Nov 2011
    Posts
    44
    Got it figured out but can't copy data from a populated graph. Any reason to that?