Thank you I'll wait
Just started REALLY using 2.25 scanner. I've dabbled with it briefly in the past only to find it wasn't working on this or that. Only thing about it I'm not totally keen on is after a log having to close out the log then re-open it. Everything else about it seems pretty frickin fantastic.
"I didn't fail, I just found 100 ways to do it wrong." - Benjamin Franklin
DO the histogram/graphs work in 2.25. Someone had asked a few weeks ago but I haven't seen an answer.
Any update on when we'll be able to log external inputs (wideband)?
any update on when the spanish oak ECM knock DMRs will be supported?
2007 Mustang GT
305ci big bore (5.0L Cammer block)
Ported heads
Lunati cams and springs
Usual compliment of bolt-ons
Thanks
2007 Mustang GT
305ci big bore (5.0L Cammer block)
Ported heads
Lunati cams and springs
Usual compliment of bolt-ons
[QUOTE=schaid;398928]You have to close the log then reopen it and the graphs populate with the data.[/QUO
Thank you very much for that info!
Can we add injector pulse width for FPDL5A2? Would be nice to know the duty cycle.
Thanks!
Hey Eric, is the MAF Period PID supported in strategy FMDN1AM? I can't get the MAF Period PID to show up in the channels. I deleted my vehicle in the VCM Scanner vehicle folder and I picked up an extra MAF PID, but not the one I needed. Any idea's?
Also, I can't add any of the generic PID's in the channels either.
I don't know if this has anything to do with it, but the car is a 2012 3.7 V6 Mustang manual transmission with factory performance pack so it has an extra traction control setting ("Sport Mode"), different wheel and tire size as well as 3.31's instead of 2.73's on the base model 3.7 V6 Mustangs.
Thanks for the reply, I guess I will download the latest copy of 2.24 and create a custom PID. I pretty much have everything else I need to dial the car with 2.25.
Last edited by AKDMB; 10-05-2015 at 02:08 PM.
Setup my tune per coyote cookbook. Logging to dial in maf and the scanner isn't picking up ltft's. Any reason to this? I'm logging ltft bank 1 sae and same for bank 2. It's a 14 gt
Got it figured out but can't copy data from a populated graph. Any reason to that?