Got my drivers fixed, but not I'm running into problems installing the .NET framework. It says .NET 2.0 isn't compatible with a 64 bit system. I even tried installing a newer version of the .NET framework to no avail.
This is driving my nuts. I can't find the email that Bill sent me with the beta download link either. Will that make any difference if I try to install that rather than the 2.22 version?
2004 PBM M6 GTOTorquer v.2, Lingenfelter 243s, FAST 90, PTM 92, SVO greentops, SS OTRCAI, SLP LTs, Powerbond UDP
Found this thread and solved the issue:
http://www.hptuners.com/forum/showthread.php?t=30495
2004 PBM M6 GTOTorquer v.2, Lingenfelter 243s, FAST 90, PTM 92, SVO greentops, SS OTRCAI, SLP LTs, Powerbond UDP
I Have Windows 7 And Can't Get the .net framework to work on my computer. I have windows 7 64 bit and this doesn't work. I need This operating stat. Please Help ASAP...
Originally Posted by ls88foxbody
follow this step by step..
http://www.hptuners.com/forum/showthread.php?t=5228
..
We Can Fix Your Bricked PCM Or Your YYYYYY OS ID
Sounds like you need to use the software version we posted without the net framework checks found here:
http://www.hptuners.com/forum/showthread.php?t=30495
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
got mine working. I DL the link that Bill posted and also did the driver lookup from post #1
good luck man.
David
thanks for posting this, i bought a new laptop and thought i wasn't going to be able to use it for tuning! saved my life!!!
2014 Camaro 2SS/RS 6spd - Cold Air Inductions Intake
Gone: 2007 Grand Prix base - Headers/HV3/FWI
I did everything the link said. I have a Dell with Windows 7 with 64 Bit os. I see the channels A and B working properly under the devices panel. I install the 2.22 VCM Suite cd and it says i need .net 2.0. When i try to install that it says i can due to using 64 bit. I'm about done with this whole kit. Been trying for hours now. Still getting no where. Can someone please help me out asap.
theres a link in the help section sticky to the version of 2.22 youll need to use
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Although I found a link to it earlier in this thread, I wanted to bring the actual fix to light in here. My computer is giving me grief over the fact the drivers are unsigned. The fix for that is to reboot the computer and keep pressing F8 until the computer brings up your options. Arrow down to highlight "disable driver signature enforcement" and hit enter. Then work in your driver installation.
Last edited by blownbluez06; 07-16-2011 at 02:43 PM.
Hsquared racing engines RHS 427, Procharger F2, Moran Billet Atomizer injectors, Alky Control,Mast LS7 heads, Nitrous outlet kit,Tilton quad disc clutch, DSS shaft, RKT56 ZR1 trans, RPM Quaife diff. Built and tuned by yours truly.
Are you using the drivers from this link:
http://www.hptuners.com/pub/HPT_MPVI_Drivers.zip
They are signed.
We got this guy Not Sure, ...
I installed the software on my new laptop. I updated all the drivers for windows 7 64 bit system. When I plug in the hp tuners to the usb the sytem crashes and performs a memory dump. Any ideas on how to fix this?
so i can't get channel b to show up, any ideas?
Running xp, have followed the guide 4 times and it will never instal channel b. The cable and MPVI are brand new, I haven't been able to use it yet...
Suggestions anyone?
Last edited by Domsz06; 08-20-2011 at 04:47 PM. Reason: subscribed.
Delete the drivers and try again, eventually they will show up, if not contact support.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Ok I'll try a few more times. I tried 3 times already. I'll try more.
Thanks.
Having the same issue. I've tired it probably 20 times now.
http://files.hptuners.com/support/De...Win7Driver.swf
Demo doesnt work............
2007 C6 coupe LS3 416 6 speed mn Z51 3LT
Vararam Snake charmer 160 Stat
Kooks 1 7/8 headers with jet hot
Fast 102 ported intake 102 TB RPM Level 5 T56
MGW short throw ZIP 4.10 Severe Duty rear
RPS TWIN DISC CARBON CLUTCH CCWs ele wp
RPM LEVEL 5 TRANS W/HARDENED OUTSHAFT
http://www.youtube.com/watch?v=PtOPy_lp2QY
10.66 1.47 60ft 133+mph
...'s do not work in a link. You'd need the actual link.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
I have gotten the software to work fine with no framework issues on my new laptop.
However it will not recognize the interface. I downloaded the signed drivers inthe link. unintstalled the unsigned drivers (even checked the delete box) then tried to install the drivers in the above link.
Here is what she tells me:
"windows thinks the driver you have are up to date"
then I check the details box and it tells me they are unsigned.
I keep following the instructions on the various threads on this issue with no resolution.
Me love boost long time.
Update, delete every driver you can find relating to the interface. For some reason win7 64 will ignore an overwrite. You must remove them completly. Then download the signed drivers again, unzip and re-install. (you must tell windows to delete the driver when you unistall the interface)
It is now functioning correctly.
Me love boost long time.
Reply With Quote
