Fg turbo jet boat

[hiddeous]

Cool, I had asked about this previously.
1 Do i need to flash it back to the original tune, then read with 2.24 from there?
2 Do i need the trans connected ( owner has sold it ) as I believe that is why trans stuff is not showing up, therefore dont have the option to set to manual.
Appreciate the help.

1. Yes flash back to stock and read with 2.24

Are you able to lay your hands on a manual FG tune?

[JETURBO]

If u need one i got one u can have

[mycomputeratesme]

1. Yes flash back to stock and read with 2.24

Are you able to lay your hands on a manual FG tune?

Thanks for the clarification.
There have been a couple of offers so will ask thanks.

[mycomputeratesme]

Thanks for the offer jet, will let you know.

[Grant LS1]

2008 fg try stockt(HAEDJP6).hpt

Try this it was modified but I tried to make it stock as best I could?

[mycomputeratesme]

2008 fg try stockt(HAEDJP6).hpt

Try this it was modified but I tried to make it stock as best I could?

Thanks Grant. Had a quick look and under trans i only have general and three parameters still? No option to disable or enable trans?

[Grant LS1]

Yeah that is definitely a manual file & with 2.24 so best starting point I think?

[mycomputeratesme]

Yeah that is definitely a manual file & with 2.24 so best starting point I think?

Thanks.
Will let you know how i get on tomorrow.

[mycomputeratesme]

Well busy day. Used a aftermarket ecu to get it up and running and validated today.
Will revisit the factory ecu once i have finished doing what i need to do with proving the combination.
Will update when i have news.
Thanks

[mycomputeratesme]

Having an issue trying to load the new file...
Have emailed support.

On another note it is going awesome.

[JETURBO]

Pictures please and details of the ecu set up

[mycomputeratesme]

Pictures please and details of the ecu set up

It wont attach the vid.
Plug in full control of cams, e throttle etc.

[JETURBO]

Mate ur going to have to throw up more detail than that on this forum

[bugsy]

Jet,
Not that we play with injection or the odd ecu....
But details and more details are always a must in here.

[JETURBO]

Who would of thought we may be interested lol

[mycomputeratesme]

Mate ur going to have to throw up more detail than that on this forum

Didn't think this forum was the place to discuss an aftermarket ecu... Maybe on the other forum.

Link to short vid. Sorry about the filming, choppy lake and 90 odd kmh made it a bit hard.

https://www.facebook.com/jason.cutel...7/?pnref=story

[JETURBO]

Jason just post up the specs of the ecu we will let it slide just this once

[mycomputeratesme]

Jason just post up the specs of the ecu we will let it slide just this once

Link G4+

[mycomputeratesme]

2008 fg try stockt(HAEDJP6).hpt

Try this it was modified but I tried to make it stock as best I could?

Update.
Had some issues and could only get it to load with Beta in the end.
There is still some sort of torque management going on but it will allow full throttle until approx 3400 rpm at which point it drops back to 30% and maintains rpm.
So better but much the same.
Fault codes present before turning anything off were
PO141
PO443
PO500
PO801
P1000
P1565
U1039
U1900
U2514

Now it is looking more like the main missing component could be the speed signal address. Not sure how I can overcome that.
Can we log Torque source?

[JETURBO]

Why are you bothering if u have full control off an aftermarket ecu ?

I wouldn't