Results 1 to 20 of 20

Thread: 6.4L Ford Diesel and TCM Read Support in Latest Beta

  1. #1
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,409

    6.4L Ford Diesel and TCM Read Support in Latest Beta

    The latest 2.25 Beta has the ability to read the Ford 6.4L Diesel ECM and TCM.

    Please send in STOCK reads to [email protected]

    For the controller type, select the following.

    For the ECM - Green Oak 2048K, Ford 6.4L Diesel
    For the TCM - Silver Oak 2048K, Ford 6.4L Diesel
    Eric Brooks
    HP Tuners, LLC

  2. #2
    Tuner in Training judeisnotobscure's Avatar
    Join Date
    May 2015
    Location
    Atlanta
    Posts
    12
    Score!!!!

  3. #3
    Tuner in Training Cody @ ATP's Avatar
    Join Date
    Jun 2015
    Posts
    31
    Reading another to send over tonight Eric.

  4. #4
    Potential Tuner
    Join Date
    Jun 2015
    Location
    West Palm Beach, FL
    Posts
    5
    I can send a stock one tomorrow morning

  5. #5
    Tuner in Training Cody @ ATP's Avatar
    Join Date
    Jun 2015
    Posts
    31
    Any ETA when these will be supported for editing?

  6. #6
    Quote Originally Posted by Cody @ ATP View Post
    Any ETA when these will be supported for editing?
    No ETA yet, we are working on it though

    -Matt
    There are two ways of constructing a software design: One way is to make it so simple that there are obviously no deficiencies, and the other way is to make it so complicated that there are no obvious deficiencies. The first method is far more difficult.

  7. #7
    Potential Tuner
    Join Date
    Jun 2015
    Location
    West Palm Beach, FL
    Posts
    5
    Any new word with editing??

  8. #8
    Banned
    Join Date
    Sep 2015
    Posts
    88
    Quote Originally Posted by JDL MOBILE DYNO View Post
    Any new word with editing??
    Still being worked on, coming soon!

    -Matt

  9. #9
    Tuner in Training Cody @ ATP's Avatar
    Join Date
    Jun 2015
    Posts
    31
    Quote Originally Posted by MattH@HPTuners View Post
    Still being worked on, coming soon!

    -Matt
    Great news! I've got my 6.4 itching to be flashed with it!
    Last edited by Cody @ ATP; 10-19-2015 at 06:19 PM.

  10. #10
    Potential Tuner
    Join Date
    Jun 2015
    Location
    West Palm Beach, FL
    Posts
    5
    Quote Originally Posted by Cody @ ATP View Post
    Great news! I've got my 6.4 itching to be flashed with it!
    I'm just patiently waiting for the good news as well lol

  11. #11
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,409
    I'm working on nothing but this until it is done. Made a lot of progress the last couple of weeks. Hope to be done soon :-p
    Eric Brooks
    HP Tuners, LLC

  12. #12
    Tuner in Training Cody @ ATP's Avatar
    Join Date
    Jun 2015
    Posts
    31

  13. #13
    Banned
    Join Date
    Sep 2015
    Posts
    88
    Quote Originally Posted by Eric@HPTuners View Post
    I'm working on nothing but this until it is done. Made a lot of progress the last couple of weeks. Hope to be done soon :-p
    And its looking mighty fine

  14. #14
    Tuner in Training Cody @ ATP's Avatar
    Join Date
    Jun 2015
    Posts
    31
    Quote Originally Posted by MattH@HPTuners View Post
    And its looking mighty fine

  15. #15
    Tuner
    Join Date
    Mar 2009
    Location
    Kokomo,In
    Posts
    54
    cant wait! we have 5- 6.4 motor builds going on right now and all need tuning when done!
    Joe ''House'' Kupferschmid
    Diesel Tuning man..
    FB me or
    www.angoladavesdiesel.com

  16. #16
    Tuner
    Join Date
    Dec 2013
    Location
    Down Under
    Posts
    168
    My neighbour has a Spartan tuned 6.4 Powerstroke that I tried to read. Once the read of the pcm and tcm is completed, I get a checksum error, and that's as far as I get. Is this normal at the moment until you finalise 6.4 editing, or only because I'm trying to read the already edited pcm/tcm? I'm using 2.25 beta

  17. #17
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,409
    Quote Originally Posted by muz79 View Post
    My neighbour has a Spartan tuned 6.4 Powerstroke that I tried to read. Once the read of the pcm and tcm is completed, I get a checksum error, and that's as far as I get. Is this normal at the moment until you finalise 6.4 editing, or only because I'm trying to read the already edited pcm/tcm? I'm using 2.25 beta
    Normal until it's released.
    Eric Brooks
    HP Tuners, LLC

  18. #18
    any rough idea on an eta on 6.4l editing support?

    i have a few i need to tune

  19. #19
    Banned
    Join Date
    Sep 2015
    Posts
    88
    Quote Originally Posted by scotte View Post
    any rough idea on an eta on 6.4l editing support?

    i have a few i need to tune
    No ETA, it is being worked on currently.

  20. #20
    Quote Originally Posted by MattH@HPTuners View Post
    No ETA, it is being worked on currently.
    ok

    if you need any volunteers i have access to an 2008 f250 6.4 and i have a vcm2 / ford ids subscription to do a blank path program to recover it if need be