If you have one of these and you have the original TCM in the car, please download latest 2.25 and send support a combo ECM/TCM read.
Thanks!
If you have one of these and you have the original TCM in the car, please download latest 2.25 and send support a combo ECM/TCM read.
Thanks!
Will do this tonight. Post it here or send to support? Also I have a modified TCM, I can scan that one or a stock one, whichever you prefer.
Yes I had sent you a copy of the modified one, but with a much long ago version of the 2.25. Didn't know if something had changed that I should rescan it.
I will see about a stock TCM read, its a little risky for me to drive the vehicle with it installed since its the EGS52 version, which is a no shift while in autostick firmware version.
That's OK, we'll get it somewhere else. We appreciate your help though.
I just sent an 06 300 complete read. Had Diablo 93 octane tune installed when we received the car for tuning
Do you still need this? I have a read off a 2006 Charger.
I put in for the latest beta.
Once I receive I can get you a stock 06 Charger read earlier this week.
Also would a 1500 2wd Hemi be any good?
How do I do a ecm/tcm read?
I'm looking for a couple volunteers for some testing. Must have access to vehicle with original or Mopar TCM and able to provide timely feedback. Please e-mail support with message "05-06 Dodge vehicle testing."
Edwin P. Gregory III
SOUTHERN HOTROD, LLC
2230 Richland St.
Kenner, LA 70062
SOUTHERNHOTROD.com
888-BIG-HEMI
I'll let you know if we get another 06 in the shop.