Results 1 to 3 of 3

Thread: P1227 Threshold

  1. 09-13-2015 #1
    Giannaj
    Giannaj is offline
    Potential Tuner
    Join Date
    Apr 2015
    Posts
    8

    P1227 Threshold

    Hey fellas how do set the P1227 threshold higher than 1.000? When I try set it to 255.000 it automatically reverts it to 1.000. Im trying to tune my own car but It keeps cutting boost after a few hits of the throttle.


    P1227_thresh.PNG


    [ECM] 19070 - Wastegate P1227 Threshold: A/D Count Threshold for setting P1227 (boost sensor too high). Setting this to the maximum allowed value will prevent the P1227 from setting.

    0.000 to 1.000
    Reply With Quote Reply With Quote
  2. 09-13-2015 #2
    Engineer@HPT
    Engineer@HPT is offline
    HPT Employee Engineer@HPT's Avatar
    Join Date
    Jan 2015
    Location
    fecadefa
    Posts
    615
    Probably a definition bug. Please e-mail your file to support along with the parameter IDs affected.
    Reply With Quote Reply With Quote
  3. 09-17-2015 #3
    Eric@HPTuners
    Eric@HPTuners is offline
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,412
    This has been corrected. Max value is set to 15 now.
    Eric Brooks
    HP Tuners, LLC
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »