Missing Spark TqMgt Table ??

[Osman]

I am getting negative spark advance during shifts on 2017 C7 with A8
-2.5 degrees to be more specific.. All taken away by torque management.

I adjusted my spark minimums and i don't see any other tables where i can adjust how much spark is taken out.. Am i missing something ??
Also, would adjusting Shift Torque Factor do this ?? do I increase or decrease it for less torque management ??

spark.png
trans1.png
min_spark.png

[SultanHassanMasTuning]

did you disable upshift torque in trans?

[Osman]

did you disable upshift torque in trans?

I did not... that would take all torque management out.. i was trying/hopeing to take out only some of it out...

[Ben Charles]

Tq min doesn’t work on the a8 for a bottom limiter of spark like it did on the a6 shifts..
I have had some luck changing the virtual tq tables, but still not where I would want the timing at, but better then stock

[Osman]

What about changing Shift Torque Factor to 0.9 for gear shift I want, technically that would decrease torque management. Am I right ??

[Osman]

Just a followup on this... If you set your Shift Torque Factor to 0.7 you will not see negative spark advance, and it only drops to about 5-7 degrees...