How do you correctly disable Maf sensor 2001 5.3 in a street rod.will be using iat sensor.
How do you correctly disable Maf sensor 2001 5.3 in a street rod.will be using iat sensor.
If you cut/remove the solid black wire it will remove the ground from just the MAF, they black with yellow tracer is the ground for the IAT. This will leave your IAT enabled and will disable the MAF...
Yes this is true but by doing it that way it will trip mil correct??
So you arent using the MAF ever again or are you just trying to run in SD forever??
It's so much easier to run a MAF sensor and keep it simple though, just sayin.
Otherwise these two links give you idea on whats need for it to fail the MAF and go SD. Just search a little.
http://www.hptuners.com/forum/showth...ble+maf+sensor
http://michigansnowmobiler.com/hptun...ons%20rev2.pdf
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
Yes, it will trip the mil. You can then change the settings so the mil doesn't apply, or you can run an SD tune altogetherOriginally Posted by sagola11
Thank you for the help
Reply With Quote