Results 1 to 4 of 4

Thread: 2007 Wrangler with 2003 LM7 / 4L60e

  1. #1
    Tuner
    Join Date
    Sep 2015
    Posts
    53

    2007 Wrangler with 2003 LM7 / 4L60e

    Hello,

    I just finished installing the engine and trans, got all my wires hooked up, engine runs etc.

    The Jeep PCM runs the gauges etc, with eop, ect and ckp sensors, i tried shutting down all the mill triggers but i still have the TB light on.

    Any way to turn this off?

  2. #2
    Tuner in Training
    Join Date
    Feb 2015
    Posts
    25
    Currently what you need to do it is not mapped out in the software, I know they are working on it!
    Hope this helps
    AJ

  3. #3
    Tuner in Training
    Join Date
    Jul 2015
    Posts
    10
    Quote Originally Posted by Bertus76 View Post
    Hello,

    I just finished installing the engine and trans, got all my wires hooked up, engine runs etc.

    The Jeep PCM runs the gauges etc, with eop, ect and ckp sensors, i tried shutting down all the mill triggers but i still have the TB light on.

    Any way to turn this off?
    Hey bud don't want to jack your thread but maybe you could help me? I just finished a ls2 in my 07 wrangler. I lost my speedo and fuel gauge. I did my harness for the jeep side with only crank, oil, temp, trans range, tcase range,alt and ac. Did you have anything else hooked up? Thx

  4. #4
    Tuner in Training
    Join Date
    Jul 2015
    Posts
    10
    Also if you still have your throttle light on I might be able to help. Pm me