Sup Guys, new here and to the tuning world, Im a new HP TUNER nGuage dealer as well. Looking for some basic start up info or links. I have a 2015GT with SCT lund tune. Wondering how to get started on my own tunes.. Excuse any stupid questions as well..But its best to ask than not to.
Welcome to the forum. I would say that the best advice I have is to just familiarize yourself with datalogging first. Set up histograms or graphs to plot your data in a way that makes sense. You definitely don't want to make any tune changes without knowing how to capture good data, you fine tune and make changes off of good data. Below are some links to threads about common tune changes. If I can think of any more to add, I will post them. Best of luck! Just do as much research as you can before making changes. There's no such thing as a stupid question, ask as many as you can.
How to tune the MAF after the addition of a cold air intake (Thread)
http://www.hptuners.com/forum/showth...ay-to-tune-MAF
What tune changes to make if you get rid of your catalytic converters (Thread)
http://www.hptuners.com/forum/showth...em-in-the-tune
Tune changes that need to be made for the Boss 302 Intake Manifold (Thread)
http://www.hptuners.com/forum/showth...-a-2014-Coyote
List of what the different torque sources are (Thread) http://www.hptuners.com/forum/showth...-Torque-Source
Last edited by AKDMB; 03-14-2016 at 09:42 PM.
Thank You very much AKDMB, much appreciated, yes im doing lots of research, and reading, lol.
These are the help files for 2.24, they have a bunch of different info and demos. Even though you use 2.25, a lot stuff from here still applies.
2.24 Help Files (Guide)
http://www.hptuners.com/help/
Last edited by AKDMB; 03-14-2016 at 09:42 PM.
Thanks AKDMBOriginally Posted by AKDMB
Found some more info might help.
LU-47 injector tuning info(Thread)
http://www.hptuners.com/forum/showth...418#post406418
Using 2.25 Scanner, by the Tuning School (Youtube Video)
https://youtu.be/1jRbFhxSOAw
Master Engine Tuner: 3.7 V6 Mustang Tuning (Article)
http://www.masterenginetuner.com/2011-mustang-v6.html
Master Engine Tuner: NGauge e85 Boss Tuning (Youtube Video)
https://youtu.be/rtGBy8u1eYo
Master Engine Tuner: Fiesta ST Tuning(Article)
http://www.masterenginetuner.com/2014-fiesta-st.html
How to create a Ghost Cam Tune (Thread)
http://www.hptuners.com/forum/showth...-13-mustang-GT
Explanation of Ford's Flex Fuel logic for idiots(Thread)
http://www.hptuners.com/forum/showth...918#post402918
Last edited by AKDMB; 12-30-2015 at 11:04 PM.
I recognize the username I think. Welcome!
Eric Brooks
HP Tuners, LLC
2005-2010 4.6 3v Mustang Tuning(Thread)
http://www.modularfords.com/content/...sing-HP-Tuners
Ford Logic and Terminology, some inferred MAP info (Thread)
http://www.hptuners.com/forum/showth...nd-Terminology
2005-2010 4.6 3v Mustang, tuning for cams and intake manifold(Article) http://www.masterenginetuner.com/for...ng-fr500s.html
Last edited by AKDMB; 01-08-2016 at 08:55 PM.
Flashing and reading 2015/2016 Mustangs with push button start (Thread) http://www.hptuners.com/forum/showth...16-Mustang-GTs
Weird issues after flashing 2015/2016 Mustangs (Thread) http://www.hptuners.com/forum/showth...a-2016-GT-****
Throttle body data for various throttle body's. This includes Effective Area and Predicted Throttle Angle Data (Thread) http://www.hptuners.com/forum/showth...ody-M-9926-SCJ
Turning up the boost on an ecoboost! (Thread) http://www.hptuners.com/forum/showth...coBoost-Advice
2015 5.0 Cam Timing discussion(Thread)
http://www.hptuners.com/forum/showth...Overlap-Tuning
2015 5.0 atknson cycle discussion (Thread) http://www.hptuners.com/forum/showth...n-cycle-engine
Last edited by AKDMB; 03-14-2016 at 09:43 PM.
damn... lots of good reading here.. I have HPT and I'm scared shitless to try anything with it.. lol guess its time to do some reading.
2015 Mustang GT, PP, HP Tuners VCM, K&N drop in, AIRAID CAI intake tube, Steeda drop springs, trans mount, shifter bracket, sub frame bushing kit, Diff bushing kit, sub frame alignment pins, American Muscle 19x10 PP rear wheels, 305/35r19 MT drag radials.
Scared shitless describes my first flash pretty well.
Throttlebody tuning using the torque/torque inverse tables. Tuning out throttle surge specifically. This is how you dial in a throttle body.(Thread)
http://www.hptuners.com/forum/showth...ne-out-Surging
Updated Help Files!!! Help files for version 3.0 VCM Editor/Scanner. How to use HP Tuners software(Guide)
http://www.hptuners.com/help/VCM-Editor/
Some more random reading on MAF tuning, detailed pictures of how to calculate a base correction for the MAF Curve on PAGE 7 of this thread (Thread)
http://www.hptuners.com/forum/showth...F-tuning/page7
Last edited by AKDMB; 04-29-2016 at 11:13 PM.
subbed
Torque and Torque Inverse Tuning discussion, when do they need tuning? (Thread)
http://www.hptuners.com/forum/showth...ing-discussion
How to correct the Speedometer on newer Fords (Thread)
http://www.hptuners.com/forum/showth...edo-Correction
Last edited by AKDMB; 03-14-2016 at 09:43 PM.
How to setup a base tune for a Cobra Jet Intake Manifold and Monoblade, you will need to look at the link above to fine tune the torque/torque inverse tables (Thread)
http://www.hptuners.com/forum/showth...ody-M-9926-SCJ
Discussion about different strategies(OS's if you want to think of them like that), which will work/won't work for different applications, possible issues that may arise (Thread)
http://www.hptuners.com/forum/showth...nts-Suggestion
Last edited by AKDMB; 03-14-2016 at 09:37 PM.
Missing Parameters in your scanner? Here's what you need to email to support so that they can fix your issue (Thread)
http://www.hptuners.com/forum/showth...732#post422732
How to run a single wideband on a Coyote for a single turbo application (Thread)
http://www.hptuners.com/forum/showth...e-Turbo-Advice
^^^^Here's a followup thread where someone used the above info (setting up a tune for a single wideband) and had some minor issues. There's some extra info here to go along with the above thread http://www.hptuners.com/forum/showth...ngle-o2-sensor
Last edited by AKDMB; 06-07-2016 at 05:28 PM.
Throttle data for 2015+ cars with GT500 throttle body (Thread)
http://www.hptuners.com/forum/showth...le-tuning-Ford
AKDMB, your awesome! Thank you!
This has tons of great info! Thanks for taking the time to add and update
Keep an eye on the Master Engine Tuner site, he is doing an entire series on different tuning topics with the HP Tuners supercharged 2015 Mustang GT. A few are already linked in below.
02 Closed Loop Voltage Bias (Thread)
http://www.hptuners.com/forum/showth...-voltage-to-me
Tuning a Wet Nitrous kit on a Coyote (Thread)
http://www.hptuners.com/forum/showth...t-nitro-tuning
Master Engine Tuner: 2015 Mustang GT Torque Table Tuning (Article)
http://www.masterenginetuner.com/201...e-maps-p1.html
Master Engine Tuner: 2015 Mustang GT Ti-VCT Tuning (Article)
http://www.masterenginetuner.com/201...ti-vct-p1.html
Master Engine Tuner: 2015 Mustang GT E85 Tuning (Article)
http://www.masterenginetuner.com/2015-mustang-e85.html
Ford Speed Density Discussion (Thread)
http://www.hptuners.com/forum/showth...EcoBoost/page3
Reply With Quote