Did I miss how many credits are needed for tuning the 03-07 dodge w/ cummins? Standard 2?
Yup, earlier in this thread, 2 dodge credits.
Any chance you're gonna possibly support the EcoDiesel?
Im having an issue with not hitting commanded fuel rate and it dropping off as RPM climbs. Everything else is working great for me, trans etc... I cant find any other limiters to turn off that i think would affect this that i can find anyways, but i could simply be over looking something. Anyone willing to check out the file see if im missing something? I can email it to you. HPT support directed me to the forums for this question , so here it is!
Yeah. Logged my smarty tune and it will hold 155 and change to shift point. I have a FASS 150 lift pump on the truck.
was looking for a stock 05 cummins file in the repository to gander at with no luck, can yall post one up?
15 C7Z M7
Also came across this that has some good basic info
http://www.madselectronics.com/downl...TuningTips.pdf
For those interested here's the info I found in my research that I saved and have been referencing a lot thus far.
I'm personally not writing tunes for my vehicle but I like to learn the theories & better understand the software.
Hopefully this stuff will help a few out!
GENERAL VCM USE & FEATURES (not Diesel Specific):
- https://www.youtube.com/watch?v=SQ81wQS8QWM
- https://www.youtube.com/watch?v=7E7tHQDuMEg
OPTIMIZING SCANNING SPEEDS & ADDITIONAL DATA STREAMS:
- http://www.hptuners.com/forum/showth...er-Information
TIRE & GEAR RATIO CHANGES:
- https://www.youtube.com/watch?v=ALSA8WUOVNI
DIESEL TUNING BASICS HOW-TO:
- PDF Download from CumminsForum / Credit Mike Dillehay at ATP: http://www.cumminsforum.com/forum/at...ning-guide.pdf
- http://www.maxxtorque.com/2009/04/ef...mmon-rail.html
'03 Ram 2500 Diesel: DDP Custom 64mm Turbo, DDP 90hp Injectors, Head Studs, Built Trans, HP Tuners tune by Silver Bullet, & Carli 3" lift with Full Leafs
To any one wanting to post files in the repository below is the response I got from HP Tuners support when emailing them about the lack of diesel options in the drop down. For the time being this will tell you how to get the files uploaded correctly and then the proper details associated with the file after the fact. See below...
To Whom It May Concern:
I would like to add some Stock files to the tune repository but I don't see my engine specifically listed. Can you please add additional options to the "engine type" drop down? Specifically for the diesel engines.
For example I don't see options for the following:
5.9 I6 Dsl
6.0 V8 Dsl
6.4 V8 Dsl
7.3 V8 Dsl
Thanks in advance!!!!
RESPONSE FROM HP SUPPORT:
Please add them as 6.6ltr dsl temporarily and in the notes just note the correct size, from there we will add the engine sizes to the drop down & fix each of the files as they come in.
William Henn
HP Tuners LLC
'03 Ram 2500 Diesel: DDP Custom 64mm Turbo, DDP 90hp Injectors, Head Studs, Built Trans, HP Tuners tune by Silver Bullet, & Carli 3" lift with Full Leafs
Everyone's else's take 10min to flash or am I just special?
15 C7Z M7
Cummins PCMs require full flashing every time. 10 minutes is typical for later PCMs with external memory.
The 04 I tuned takes 5:30 to flash.
2010 Camaro SS M6. Stock Bottom End, Heads/Cam/Intake/Headers/Exhaust.
2005 Silverado RCSB. Forged 370 LQ9/Borg-Forced Inductions T6 S484/Jake's Stage 4 4L80E with D3 Brake/4WD.
2023 Durango Hellcat
i just got my interface today.. i was hoping i emailed support in enough time to be able to tune tonight.. just need that 2.25 beta!!