Everyone,
Since Eric's Melbourne visit he has been able to prioritise work the FG calibration. Eric has targeted the FG V8 Coyote engine as it has the most calibration options available. He said once he gets this up to scratch then he will roll the changes to the rest of the FGs and the BF. A staggering number of tables and scalers have been added including Lost Fuel, Gear based boost control (yea for each gear), over boost tables, throttle based boost control, ...
Too many additions for me to outline so I have added the calibration as a download and you can get the latest beta and check (2.25.2739+). Here is my list of the tables and scalars adder.
Code:
Engine
-> General
-> Idle
-> Airflow
-> General
+ TMAP Turbo Slope
+ TMAP Turbo Offset
+ TMAP Slope NA
+ TMAP Offset NA
+ Boost Sensor Slope
+ Boost Sensor Offset
-> Speed Density
+ Tuning Correction
-> Electronic Throttle
+ Driver Demand
+Filter
+ Throttle Body Model
+ Throttle Body Airflow
+ Predicted Throttle Angle
-> Fuel
-> General
+ Specific Gravity
-> +Lost Fuel
+ Lost Fuel Base
+ Lost Fuel Base Decay
-> Open & Closed Loop
-> Cranking Fuel
+ F/A Multiplier
-> Spark
-> Advance
-> Spark Tip-in
+ Airmass Enable
+ Airmass Disable
+ Tip In Retard
-> Torque Management
-> General
+ Torque ratio vs. Spark Retard
-> Traction Control System
- Disable
+ Enable Max Torque
-> SC/TC Boost Control
-> Desired Boost PID
+ Boost Gain TP
-> Turbocharger
-> Wastegate Control
+ Gear Based Control
+ Max DC on Shifts
+ DC Octane Mult
-> + WOT Boost Multiplier
+ Mult
+ 1st Gear, 2nd Gear, 3rd Gear
+ 4th Gear, 5th Gear, 6th Gear
-> + WOT Boost Adder
+ Adder
+ 1st Gear, 2nd Gear, 3rd Gear
+ 4th Gear, 5th Gear, 6th Gear
Engine Diag
-> Airflow
-> Wastegate
+ p1228 timer
+ p1228 timer
There is stuff in here that is not in SCT or Sniper
I think you will agree that this is a pretty staggering effort by Eric and HP Tuners