adding rpms to 2.5 bad SD VE table

[ccrp]

I need more rpm's in the 2.5bar SD OS.......

I am working on some ITB race cars and use the 2.5 bar SD OS for its nice VE tables. However in stock trim they are only going to 6800 rpm. I changed the row axis and hoped that would fix it but it won't, even if row axis shows 7600 it goes into REP mode anytime I hit anything higher then 6800 rpm which us a nuisance at the track

what's the trick?

[DSteck]

Post the file.

[schpenxel]

And log ideally