Why the variation in RPM? Which is correct?
Recorded this morning with latest 2.25 beta.
Why the variation in RPM? Which is correct?
Recorded this morning with latest 2.25 beta.
2006 LS2 Corvette
Automatic
2.56 gear
600 HP Edelbrock E Force Kit
No other mods
Don't use polled parameters (<- ->) if broadcast parameters (<-) are available. Broadcast parameters are basically free.
We got this guy Not Sure, ...
I just went back to my Channels list to see how many polled parameters I could change out for broadcast parameters. There were a few so I changed them. I went to my charts vs Time, gauges but didn't see any broadcast parameters listed. I'm just a bit confused as how to display or chart a broadcast parameter.
2006 LS2 Corvette
Automatic
2.56 gear
600 HP Edelbrock E Force Kit
No other mods
Well misery loves company. I hope we didn't stump the panel. I guess all the green 12's are broadcast parameters but none show up in any of the charts or gauges. I'm wondering if you select a broadcast parameter in "Channels" that associated parameters will work in the charts and gauges. Too cold for me to fool with it tonight. If you are in the tinkering mode let me know if you happen try it.
2006 LS2 Corvette
Automatic
2.56 gear
600 HP Edelbrock E Force Kit
No other mods
what is better to log, the Black/White 12, or the Black/Green 12?
2010 Camaro LS3 (E38 ECU - Spark only). MS3X running complete RTT fuel control (wideband).
Whipple 2.9L, 3.875" Pulley, kit injectors, supplied MSD Boost-A-Pump, stock pump
LG Motorsports 1 7/8" Headers - No Cats, stock mid pipe with JBA Axle Back
ZL1 Wheels/Tires