Looking for an experienced AND SKILLED tuner and dyno shop in Ohio to help with a 2016 Mustang GT build. Any input or references.. good or bad are greatly appreciated!
Thanks
Looking for an experienced AND SKILLED tuner and dyno shop in Ohio to help with a 2016 Mustang GT build. Any input or references.. good or bad are greatly appreciated!
Thanks
Jeff Chambers @ CRT Performance LLC is in Norwalk, OH. He's a member on this forum as "jchambers"
Jaime
Thanks ElecTech...
Anyone have any experience with Watson Racing in MI???
Thanks!
Since your in Ohio, I'd look into On3 performance. They seem to be finishing up their TT kit for the 2015+ Mustangs!
Bader Norris
MEP Tuned
Telephone: +965-55446651
Email: [email protected]
Okay since Jeff has retired.... .....Because of this thread I did end up working with him on a couple of projects over a couple of years and I am more than disappointed he has stepped away.
Any new suggestions for a GOOD tuner in the Midwest. Building a Gen3 Coyote.
'
Thanks All!
I would recommend Brian Turner of DynoTune Motorsports.
http://www.dynotunemotorsports.com/
2022 Cadillac CT5-V Blackwing (733 whp)
2022 Cadillac CT4-V Blackwing (716 whp), 10.750 @ 134.77 mph
2016 Cadillac ATS-Vs (eleven ATS-Vs in the 9s)
2008 Pontiac G8 (first G8 in the 10s), 10.727 @ 129.87 mph
2000 Bonneville SSEi (first 3800 Bonneville in the 10s), 10.711 @ 125.71 mph
1999 Grand Prix GT (first 3800 FWD in the 8s), 8.902 @ 154.90 mph
1998 Firebird (first 3800 RWD in the 8s), 843 whp, 8.991 @ 152.12 mph
1998 Grand Prix GTP (first 3800 FWD in the 10s), 9.499 @ 145.13 mph
Came here to say the same as Tapout, Brian is great!
JTC Performance - Authorized HP Tuners Reseller
Remote performance tuning
FYI Brian is MAF only, so if you want a full Calibration ie. Greg Banish style, look elsewhere. I don't think ON3 does Calibration, but they do seem to work with some of the biggest shops and you can go remote with their dyno maybe but they are really busy with their own stuff.
I know several people that use Brian and are very happy however I wanted a full Cal. That said several guys were jacked over by other shops and Brian was able to get their cars running to their satisfaction so he may be a good option. He always seems busy.
Thank you Superman07.... it sounds like he is not the guy for current need... Good thing I couldn't get a hold of him anyway.
Appreciate the feedback!
He is a stand up guy. He is straight with customers. I can appreciate that. Also in Ohio most folks don't want to pay for the time or trouble to do a proper OEM style calibration so he does do a great job for the guys that fit his service.