i have been waiting also so that i can slap my turbo and and fat injectors on my dakota and let her eat ....hopefully soon
i have been waiting also so that i can slap my turbo and and fat injectors on my dakota and let her eat ....hopefully soon
nothing yet
2002 Dodge Dakota 5.9 R/T reg cab
Heads/Cam/Stall/Suspension/Tires/170stat
365rwhp & 365ft-lbs
1/4 mile: 12.4@110mph
1998 Pontiac TransAm Ws6
Heads/Cam/Stall/Suspension/Tires/160stat
422rwhp & 400ft-lbs
1/4 mile: 11.6@116mph
2006 Chrysler 300c Srt8
Whipple 6.5psi/HHP Stage 2 Heads-Cam/Borla/88mmTB/180stat
580rwhp & 490ft-lbs
never drag raced
2009 Dodge Viper
Mopar Performance Race Exhaust & PCM
Just a polite bump. I re-read my JTEC and saw a few more tables than a year ago, and some data reorganized into different tabs. I would love to finally see a licence option and the write tab enabled!
Level 3 Master Chrysler/Jeep/Dodge/Ram technician
20 years experience
what are u reading i tried reading my dakota and i get a no definition error when i connected to try and log i got pids but no data when recording
2000 4.7l Jeep Grand Cherokee. I had sent the read in to be defined (long ago), which is why I likely can see it.
Level 3 Master Chrysler/Jeep/Dodge/Ram technician
20 years experience
Hey Keith do you have any updates as far as the Jtec stuff goes?
2002 Dodge Dakota 5.9 R/T reg cab
Heads/Cam/Stall/Suspension/Tires/170stat
365rwhp & 365ft-lbs
1/4 mile: 12.4@110mph
1998 Pontiac TransAm Ws6
Heads/Cam/Stall/Suspension/Tires/160stat
422rwhp & 400ft-lbs
1/4 mile: 11.6@116mph
2006 Chrysler 300c Srt8
Whipple 6.5psi/HHP Stage 2 Heads-Cam/Borla/88mmTB/180stat
580rwhp & 490ft-lbs
never drag raced
2009 Dodge Viper
Mopar Performance Race Exhaust & PCM
2002 Dodge Dakota 5.9 R/T reg cab
Heads/Cam/Stall/Suspension/Tires/170stat
365rwhp & 365ft-lbs
1/4 mile: 12.4@110mph
1998 Pontiac TransAm Ws6
Heads/Cam/Stall/Suspension/Tires/160stat
422rwhp & 400ft-lbs
1/4 mile: 11.6@116mph
2006 Chrysler 300c Srt8
Whipple 6.5psi/HHP Stage 2 Heads-Cam/Borla/88mmTB/180stat
580rwhp & 490ft-lbs
never drag raced
2009 Dodge Viper
Mopar Performance Race Exhaust & PCM
I emailed support asking why I could see Pids in the scanner but no info only response I got was .... it was not supported..........
Lame......
I had given up on HP and spent some money with another brand to acquire JTEC tuning. It's not ideal, but better than stock. It's clear they don't intend to ever support it. They could have put this to bed years ago if they wanted.
Level 3 Master Chrysler/Jeep/Dodge/Ram technician
20 years experience
any updates on the Jtec+ stuff? still cant do anything on my truck.
2002 Dodge Dakota 5.9 R/T reg cab
Heads/Cam/Stall/Suspension/Tires/170stat
365rwhp & 365ft-lbs
1/4 mile: 12.4@110mph
1998 Pontiac TransAm Ws6
Heads/Cam/Stall/Suspension/Tires/160stat
422rwhp & 400ft-lbs
1/4 mile: 11.6@116mph
2006 Chrysler 300c Srt8
Whipple 6.5psi/HHP Stage 2 Heads-Cam/Borla/88mmTB/180stat
580rwhp & 490ft-lbs
never drag raced
2009 Dodge Viper
Mopar Performance Race Exhaust & PCM
Diablo does not go any further back than 2005 and never has. SCT has stopped making programmers for a lot of vehicles so now its only HPTuners left. I know you guys have done lots of work on these pcms... isnt there a way we can just get a stable release so that we can do tuning? Ill be the first to buy credits. I said I would on my 2006 Chrysler and I held true to my word. I know hundreds of mopar guys on various forums that would run over here and buy both credits and programmers if you offered them something.
2002 Dodge Dakota 5.9 R/T reg cab
Heads/Cam/Stall/Suspension/Tires/170stat
365rwhp & 365ft-lbs
1/4 mile: 12.4@110mph
1998 Pontiac TransAm Ws6
Heads/Cam/Stall/Suspension/Tires/160stat
422rwhp & 400ft-lbs
1/4 mile: 11.6@116mph
2006 Chrysler 300c Srt8
Whipple 6.5psi/HHP Stage 2 Heads-Cam/Borla/88mmTB/180stat
580rwhp & 490ft-lbs
never drag raced
2009 Dodge Viper
Mopar Performance Race Exhaust & PCM
i am getting ready to just mega squirt the stupid ass truck cause i need some boost in my life........
i would be ok if they would just flat out say he guys u are out of luck.......... instead of we got u but later lol
id be happy in the mean time if i could at least log my fuel trims
The sad thing is HPT partnered with Superchips, and the cheapo FlashPaq has been writing to JTECs for 10 years or more. HPT is just being obtuse on the matter.
Level 3 Master Chrysler/Jeep/Dodge/Ram technician
20 years experience
Wow, I'm really surprised that JTEC tuning isn't released for Dakotas as of yet. I've just gotten HPTuners for my intended Hemi Swap into my Dakota, but I also have MS in case things never panned out. Honestly if you want to tune a Dakota with stock fuel setups, I'd just go the MS route. There is plenty of information on the forums for them, and lots of data available. In any event HPTuners is doing amazing things for the Hemi Community, which is why I picked up this software.
2002 Dodge Dakota 5.9 R/T reg cab
Heads/Cam/Stall/Suspension/Tires/170stat
365rwhp & 365ft-lbs
1/4 mile: 12.4@110mph
1998 Pontiac TransAm Ws6
Heads/Cam/Stall/Suspension/Tires/160stat
422rwhp & 400ft-lbs
1/4 mile: 11.6@116mph
2006 Chrysler 300c Srt8
Whipple 6.5psi/HHP Stage 2 Heads-Cam/Borla/88mmTB/180stat
580rwhp & 490ft-lbs
never drag raced
2009 Dodge Viper
Mopar Performance Race Exhaust & PCM
As I posted in the sticky as well, please guys I was one of the first ram 1500 5.9 reads to you guys.. I can see the tune!! I can't write tho. Knowing this is a blower vehicle and the blower ecm is failed, it sucks I can't even program fuel Injectors or a ve table. Come on guys we need answers, where you at with jtec??
Not finished, no eta. When it is finished we'll post, but until then don't hold your breath.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
So will there be nothing by the end of this year either Im going to guess. >!>!!>!>!>///////?????