Page 2 of 3 FirstFirst 123 LastLast
Results 21 to 40 of 55

Thread: Dakota 5.9 R/T Jtec+

  1. #21
    i have been waiting also so that i can slap my turbo and and fat injectors on my dakota and let her eat ....hopefully soon

  2. #22
    nothing yet
    2002 Dodge Dakota 5.9 R/T reg cab
    Heads/Cam/Stall/Suspension/Tires/170stat
    365rwhp & 365ft-lbs
    1/4 mile: 12.4@110mph

    1998 Pontiac TransAm Ws6
    Heads/Cam/Stall/Suspension/Tires/160stat
    422rwhp & 400ft-lbs
    1/4 mile: 11.6@116mph

    2006 Chrysler 300c Srt8
    Whipple 6.5psi/HHP Stage 2 Heads-Cam/Borla/88mmTB/180stat
    580rwhp & 490ft-lbs
    never drag raced

    2009 Dodge Viper
    Mopar Performance Race Exhaust & PCM

  3. #23
    Just a polite bump. I re-read my JTEC and saw a few more tables than a year ago, and some data reorganized into different tabs. I would love to finally see a licence option and the write tab enabled!
    Level 3 Master Chrysler/Jeep/Dodge/Ram technician
    20 years experience

  4. #24
    what are u reading i tried reading my dakota and i get a no definition error when i connected to try and log i got pids but no data when recording

  5. #25
    2000 4.7l Jeep Grand Cherokee. I had sent the read in to be defined (long ago), which is why I likely can see it.
    Level 3 Master Chrysler/Jeep/Dodge/Ram technician
    20 years experience

  6. #26
    Hey Keith do you have any updates as far as the Jtec stuff goes?
    2002 Dodge Dakota 5.9 R/T reg cab
    Heads/Cam/Stall/Suspension/Tires/170stat
    365rwhp & 365ft-lbs
    1/4 mile: 12.4@110mph

    1998 Pontiac TransAm Ws6
    Heads/Cam/Stall/Suspension/Tires/160stat
    422rwhp & 400ft-lbs
    1/4 mile: 11.6@116mph

    2006 Chrysler 300c Srt8
    Whipple 6.5psi/HHP Stage 2 Heads-Cam/Borla/88mmTB/180stat
    580rwhp & 490ft-lbs
    never drag raced

    2009 Dodge Viper
    Mopar Performance Race Exhaust & PCM

  7. #27
    Quote Originally Posted by Monzsta View Post
    Just a polite bump. I re-read my JTEC and saw a few more tables than a year ago, and some data reorganized into different tabs. I would love to finally see a licence option and the write tab enabled!
    lately when i try to read my pcm, it just says controller unlocker timed out. it wasnt doing that initially. not sure what happened...
    2002 Dodge Dakota 5.9 R/T reg cab
    Heads/Cam/Stall/Suspension/Tires/170stat
    365rwhp & 365ft-lbs
    1/4 mile: 12.4@110mph

    1998 Pontiac TransAm Ws6
    Heads/Cam/Stall/Suspension/Tires/160stat
    422rwhp & 400ft-lbs
    1/4 mile: 11.6@116mph

    2006 Chrysler 300c Srt8
    Whipple 6.5psi/HHP Stage 2 Heads-Cam/Borla/88mmTB/180stat
    580rwhp & 490ft-lbs
    never drag raced

    2009 Dodge Viper
    Mopar Performance Race Exhaust & PCM

  8. #28
    I emailed support asking why I could see Pids in the scanner but no info only response I got was .... it was not supported..........
    Lame......

  9. #29
    I had given up on HP and spent some money with another brand to acquire JTEC tuning. It's not ideal, but better than stock. It's clear they don't intend to ever support it. They could have put this to bed years ago if they wanted.
    Level 3 Master Chrysler/Jeep/Dodge/Ram technician
    20 years experience

  10. #30
    What are u using

  11. #31
    any updates on the Jtec+ stuff? still cant do anything on my truck.
    2002 Dodge Dakota 5.9 R/T reg cab
    Heads/Cam/Stall/Suspension/Tires/170stat
    365rwhp & 365ft-lbs
    1/4 mile: 12.4@110mph

    1998 Pontiac TransAm Ws6
    Heads/Cam/Stall/Suspension/Tires/160stat
    422rwhp & 400ft-lbs
    1/4 mile: 11.6@116mph

    2006 Chrysler 300c Srt8
    Whipple 6.5psi/HHP Stage 2 Heads-Cam/Borla/88mmTB/180stat
    580rwhp & 490ft-lbs
    never drag raced

    2009 Dodge Viper
    Mopar Performance Race Exhaust & PCM

  12. #32
    Diablo does not go any further back than 2005 and never has. SCT has stopped making programmers for a lot of vehicles so now its only HPTuners left. I know you guys have done lots of work on these pcms... isnt there a way we can just get a stable release so that we can do tuning? Ill be the first to buy credits. I said I would on my 2006 Chrysler and I held true to my word. I know hundreds of mopar guys on various forums that would run over here and buy both credits and programmers if you offered them something.
    2002 Dodge Dakota 5.9 R/T reg cab
    Heads/Cam/Stall/Suspension/Tires/170stat
    365rwhp & 365ft-lbs
    1/4 mile: 12.4@110mph

    1998 Pontiac TransAm Ws6
    Heads/Cam/Stall/Suspension/Tires/160stat
    422rwhp & 400ft-lbs
    1/4 mile: 11.6@116mph

    2006 Chrysler 300c Srt8
    Whipple 6.5psi/HHP Stage 2 Heads-Cam/Borla/88mmTB/180stat
    580rwhp & 490ft-lbs
    never drag raced

    2009 Dodge Viper
    Mopar Performance Race Exhaust & PCM

  13. #33
    i am getting ready to just mega squirt the stupid ass truck cause i need some boost in my life........

    i would be ok if they would just flat out say he guys u are out of luck.......... instead of we got u but later lol

    id be happy in the mean time if i could at least log my fuel trims

  14. #34
    Quote Originally Posted by Siciliano15 View Post
    Diablo does not go any further back than 2005 and never has. SCT has stopped making programmers for a lot of vehicles so now its only HPTuners left. I know you guys have done lots of work on these pcms... isnt there a way we can just get a stable release so that we can do tuning? Ill be the first to buy credits. I said I would on my 2006 Chrysler and I held true to my word. I know hundreds of mopar guys on various forums that would run over here and buy both credits and programmers if you offered them something.
    I have 3 trucks waiting and counting.....

  15. #35
    The sad thing is HPT partnered with Superchips, and the cheapo FlashPaq has been writing to JTECs for 10 years or more. HPT is just being obtuse on the matter.
    Level 3 Master Chrysler/Jeep/Dodge/Ram technician
    20 years experience

  16. #36
    Wow, I'm really surprised that JTEC tuning isn't released for Dakotas as of yet. I've just gotten HPTuners for my intended Hemi Swap into my Dakota, but I also have MS in case things never panned out. Honestly if you want to tune a Dakota with stock fuel setups, I'd just go the MS route. There is plenty of information on the forums for them, and lots of data available. In any event HPTuners is doing amazing things for the Hemi Community, which is why I picked up this software.

  17. #37
    Quote Originally Posted by DakBuilder View Post
    Wow, I'm really surprised that JTEC tuning isn't released for Dakotas as of yet. I've just gotten HPTuners for my intended Hemi Swap into my Dakota, but I also have MS in case things never panned out. Honestly if you want to tune a Dakota with stock fuel setups, I'd just go the MS route. There is plenty of information on the forums for them, and lots of data available. In any event HPTuners is doing amazing things for the Hemi Community, which is why I picked up this software.
    yea i dont get it... there are hundreds of willing to pay customers out there and nobody really seems to care... There are 11 production years of Jtecs on the road on all types of dodges chryslers and jeeps and very few if any tuning solutions.
    2002 Dodge Dakota 5.9 R/T reg cab
    Heads/Cam/Stall/Suspension/Tires/170stat
    365rwhp & 365ft-lbs
    1/4 mile: 12.4@110mph

    1998 Pontiac TransAm Ws6
    Heads/Cam/Stall/Suspension/Tires/160stat
    422rwhp & 400ft-lbs
    1/4 mile: 11.6@116mph

    2006 Chrysler 300c Srt8
    Whipple 6.5psi/HHP Stage 2 Heads-Cam/Borla/88mmTB/180stat
    580rwhp & 490ft-lbs
    never drag raced

    2009 Dodge Viper
    Mopar Performance Race Exhaust & PCM

  18. #38
    Advanced Tuner
    Join Date
    Dec 2011
    Location
    Clovis, CA
    Posts
    374
    As I posted in the sticky as well, please guys I was one of the first ram 1500 5.9 reads to you guys.. I can see the tune!! I can't write tho. Knowing this is a blower vehicle and the blower ecm is failed, it sucks I can't even program fuel Injectors or a ve table. Come on guys we need answers, where you at with jtec??

  19. #39
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    Not finished, no eta. When it is finished we'll post, but until then don't hold your breath.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  20. #40
    Potential Tuner
    Join Date
    Jan 2018
    Posts
    1
    So will there be nothing by the end of this year either Im going to guess. >!>!!>!>!>///////?????