I am trying to help my brother in law get his project to start, he purchased a beautiful harness from Mark Cambell at Street and performance. Unfortunately Mark died RIP he was very helpful to my brother in law. While his harness was being made they(street and performance) sent his PCM to get tuned and for whatever reason it got lost. They must have gotten him a used pcm and tuned it, when I initially read entire it said Jeep liberty. Presently having a no start issue, it has push button start but the PCM not grounding logic side of starter relay. If i bypass relay and turn engine over i am getting tach signal but no spark or injector pulse. I personally think its something to do with the security or SKIM. Under SYSTEM/GENERAL/SECURITY it says SKIM/DISABLED and right under it says SKIM CAPABLE/ Enabled. I thought i had something so I tried SKIM CAPABLE/ Disabled. Nothing changed so I put it back. I am including the read entire file. I am new to the Dodge tuning and thanks ahead of time for any help! Now its not letting me save/go back to the read entire i will post read entire after i reboot