looking for injector duty cycle channel in the 3.0 scanner. cant see to find it.

[lsxandres]

can anyody pinpoint were i can find the channel for "injector duty cycle"

[Sam88gta1]

Im having the same issue with any controller i plug into.

[1266318172]

Yup, no Inj duty cycle at all!!

[Keith@HPTuners]

Injector Duty Cycle is a math parameter. It is virtual. You cannot add virtual parameters to the Channel list.

You can however plot them in gauges/charts/graphs.

[lsxandres]

ahh makes sense! thanks!

[Blade Macias]

still don't understand how to set up injector duty cycle please help

[schpenxel]

Guys this isn't hard

Where do you want it? In a chart or what? You CANNOT add it to the "channel" window.

Go to chart vs. time, right click, select chart layout.

Click on the button with the plus that will say "Add series" when you hover your cursor over it. This adds a new PID to the chart

Beside the word "parameter" it should say "click to insert or change". Click on that.

Type in "duty" and hit the gear with the little green check box at the top. That will filter out all PID that you can't use and only show you valid ones.

Double click on "Injector duty cycle [Ratio]"

Change color, min, max to your liking and X out of the Chart display editor

And you are done

[mowton]

Guys this isn't hard

Where do you want it? In a chart or what? You CANNOT add it to the "channel" window.

Go to chart vs. time, right click, select chart layout.

Click on the button with the plus that will say "Add series" when you hover your cursor over it. This adds a new PID to the chart

Beside the word "parameter" it should say "click to insert or change". Click on that.

Type in "duty" and hit the gear with the little green check box at the top. That will filter out all PID that you can't use and only show you valid ones.

Double click on "Injector duty cycle [Ratio]"

Change color, min, max to your liking and X out of the Chart display editor

And you are done

Patience...:-) Lets make it a sticky :-)

Ed M

[schpenxel]

I forget I've been using it a bit longer than most

[Blade Macias]

Guys this isn't hard

Where do you want it? In a chart or what? You CANNOT add it to the "channel" window.

Go to chart vs. time, right click, select chart layout.

Click on the button with the plus that will say "Add series" when you hover your cursor over it. This adds a new PID to the chart

Beside the word "parameter" it should say "click to insert or change". Click on that.

Type in "duty" and hit the gear with the little green check box at the top. That will filter out all PID that you can't use and only show you valid ones.

Double click on "Injector duty cycle [Ratio]"

Change color, min, max to your liking and X out of the Chart display editor

And you are done

thanks

[Panos z06]

Guys my IDC shows when logging but when I save the log to review it later it shown nothing,IDC is blank..when I send my log to another person he can see IDC in the log!!weird..can anybody help?

[schpenxel]

Post a log

Are you on today's release of HPT?

[Panos z06]

I am on 3.0.19..I will post a log..

[Panos z06]

how do i post a log here?i am sorry but i am confused..

[mowton]

how do i post a log here?i am sorry but i am confused..

Start a post. Go to bottom right if post box and click ADVANCED. Go to attachments and follow the instructions a box will appear that Saya add file and browse. Hit browse, fun your log and double click file. Hit upload and file box will appear at the lower left of the open window. Hit insert online and file name should be in rhe attachment area. Close theis windo and submit the post. Did thus from my phone and memory so may be a bit disjointed.

Ed M

[Panos z06]

log ve 3.0 cal 13(1).hpl

[Keith@HPTuners]

So it doesn't open the first time you open the log, but if you re-open it, it works. We'll look into it.

[Panos z06]

Keith the weird thing is that when I log I can see the IDC working but when I save the log to review it later,it's blank..emailed my log to a friend and he could see IDC..why can't I see my IDC after saving my log?

[Panos z06]

Keith found the problem...when I save it on my desk top and open the log the IDC isn't working..when I open my scanner,and open my log file from there it works!!

[Keith@HPTuners]

Keith found the problem...when I save it on my desk top and open the log the IDC isn't working..when I open my scanner,and open my log file from there it works!!

This is fixed in tomorrows 3.0