Results 1 to 5 of 5

Thread: Misfire Min. Timing

  1. 02-06-2016 #1
    Kill
    Kill is offline
    Tuner
    Join Date
    Dec 2015
    Posts
    57

    Misfire Min. Timing

    Has anyone figured out what controls misfire minimum timing?
    Reply With Quote Reply With Quote
  2. 03-10-2016 #2
    Kill
    Kill is offline
    Tuner
    Join Date
    Dec 2015
    Posts
    57
    Figured I would bump this back up in case anyone can shed some light on it.
    Reply With Quote Reply With Quote
  3. 03-10-2016 #3
    Bamofo
    Bamofo is offline
    Tuner
    Join Date
    Dec 2015
    Location
    Middleboro, MA
    Posts
    142
    Quote Originally Posted by Kill View Post
    Figured I would bump this back up in case anyone can shed some light on it.
    where are you hitting it? Cruise? Idle? WOT? Log?
    2005 Cummins 325/600 G56 3.73
    Reving to 4800
    Worked Head, Twin Disc, BBI
    Reply With Quote Reply With Quote
  4. 03-10-2016 #4
    Kill
    Kill is offline
    Tuner
    Join Date
    Dec 2015
    Posts
    57
    Basically under light throttle and cruise regions. Once load gets to around 25 percent the misfire minimum timing seems to drop into the negatives where it won't affect anything.
    Reply With Quote Reply With Quote
  5. 03-10-2016 #5
    JohnnyK05
    JohnnyK05 is offline
    Tuner in Training
    Join Date
    Dec 2015
    Location
    Abbotsford, BC, Canada
    Posts
    14
    I have found in the past with other software is if the timing is too low I would get misfiring as I rolled into it. If you turn off pre-injection without advancing the main enough you get the same type of results.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »