03 MAP scaling

[superwagon]

As long as they are thirsty.

[Hardrvin]

factory scan tool reads to 50 psi at 4.55 volts and .5 volts is 0 psi. i dont think that you need to worry about scaling in a higher range sensor. unless you want to use a 100 psi as a guage to data log .

Intention of rescaling would be to offset the ECM's reading of the manifold pressure and run higher boost.

There is some logic/algorithm in the ECM to control the boost embedded somewhere, but now I see how we make due otherwise.

[muz79]

I wouldn't mind the option to rescale map if they ever include it in a future update. Id like to use a bigger map sensor to save having to install more gauges than I need. I already have an edge cts, and like a clean uncluttered look.