Results 1 to 3 of 3

Thread: VCM Scanner V3 How-To / Getting Started Threads

  1. #1
    Moderator
    Join Date
    Mar 2014
    Location
    Raleigh, NC
    Posts
    6,347

    VCM Scanner V3 How-To / Getting Started Threads

    This thread will be a summary of links to how-to's that answer common questions that people have when getting started in VCM Scanner V3.

    HOW TO: Setup Wideband / External sensor in VCM Scanner V3 (With PRO Interface): Thread

    HOW TO: Add Wideband reading to a Chart in VCM Scanner V3: Thread

    HOW TO: Setting up Fuel Trim Graph in VCM Scanner V3 on Virtual VE Vehicles: Thread

    HOW TO: Setup AFR Error / Lambda Error Graphs vs. VE Table (non Virtual VE Vehicles): thread

    HOW TO: Setting up MAF Fuel Trim Graph in VCM Scanner V3 (Pictures): thread

    HOW TO: Setting up MAF Graphs in VCM Scanner V3 (Video): thread
    Last edited by schpenxel; 02-25-2016 at 09:20 AM.
    Post a log and tune if you want help

    VCM Suite V3+ GETTING STARTED THREADS / HOW TO's

    Tuner by night
    CPX Tuning
    2005 Corvette, M6
    ECS 1500 Supercharger
    AlkyControl Meth, Monster LT1-S Twin, NT05R's
    ID1000's, 220/240, .598/.598, 118 from Cam Motion

    2007 Escalade, A6
    Stock

  2. #2
    Senior Tuner mowton's Avatar
    Join Date
    Mar 2007
    Location
    Florida
    Posts
    3,773
    Quote Originally Posted by schpenxel View Post
    This thread will be a summary of links to how-to's that answer common questions that people have when getting started in VCM Scanner V3.

    HOW TO: Setup Wideband / External sensor in VCM Scanner V3 (With PRO Interface): Thread

    HOW TO: Add Wideband reading to a Chart in VCM Scanner V3: Thread

    HOW TO: Setting up Fuel Trim Graph in VCM Scanner V3 on Virtual VE Vehicles: Thread

    HOW TO: Setup AFR Error / Lambda Error Graphs vs. VE Table (non Virtual VE Vehicles): thread

    HOW TO: Setting up MAF Fuel Trim Graph in VCM Scanner V3 (Pictures): thread

    HOW TO: Setting up MAF Graphs in VCM Scanner V3 (Video): thread
    Here are a few more videos......

    HOW TO: How to Transform a User Defined Wideband

    HOW TO: VVE Scanner and AFR Error Setup

    HOW TO: MAF Scanner and AFR Error Setup

    HOW TO: How to Interface a Wideband to a Standard MPVI
    2004 Vette Coupe, LS2, MN6, Vararam, ARH/CATs, Ti's, 4:10, Trickflow 215, 30# SVO, Vette Doctors Cam, Fast 90/90, DD McLeod, DTE Brace, Hurst shifter, Bilsteins etc. 480/430

    ERM Performance Tuning -- Interactive Learning ..from tuning software training to custom tunes
    HP Tuners Dealer- VCM Suite (free 2hr training session with purchase), credits and new Version 2.0 turtorial available
    http://www.ermperformancetuning.com
    http://www.facebook.com/ERMPerformanceTuning

    [email protected]

  3. #3
    Senior Tuner mowton's Avatar
    Join Date
    Mar 2007
    Location
    Florida
    Posts
    3,773
    Latest in the series of How To Video's

    How To: HP Tuners 2.24 to 3.0 Gen III Idle RAF tuning scanner setup
    2004 Vette Coupe, LS2, MN6, Vararam, ARH/CATs, Ti's, 4:10, Trickflow 215, 30# SVO, Vette Doctors Cam, Fast 90/90, DD McLeod, DTE Brace, Hurst shifter, Bilsteins etc. 480/430

    ERM Performance Tuning -- Interactive Learning ..from tuning software training to custom tunes
    HP Tuners Dealer- VCM Suite (free 2hr training session with purchase), credits and new Version 2.0 turtorial available
    http://www.ermperformancetuning.com
    http://www.facebook.com/ERMPerformanceTuning

    [email protected]