Please give me your opinion on my LS3 injectors to LS1 ECM tables
Hello, just got my HPtuner's software and I enjoy being able to see what the car does and all. I have a 72 Nova with an LS swap. I would like to know if my copy paste on the injector tables is correct. I assume there are only 4 tables that are needed to be copied, Flow Rate vs KPA, Offset vs Volts vs VAC, Short Pulse Adder and MIN Injector Pulse.
Here are the specs of the swap:
- Block is a Gen IV 6.0
- L92 823 heads
- LS3 Intake
- LS3 Injectors
- LS3 MAP sensor
- BTR LS3 Cam STG II
- LS2/3 Knock Sensors
- 4L65e with 2800 stall
It is all controlled with a LS1 ECM and BP Automotive harness. I got the LS7 Injector tables from here, http://www.hptuners.com/forum/showth...or-LS1-PCM#top
I also found this thread (from 2010 though), http://www.hptuners.com/forum/showth...-To-LS1-Format, has the spreadsheet but the numbers are slightly different. So I opted to use the DSteck file.
Any opinions will greatly appreciated. Thank you for your time.
Reply With Quote