Had too many last night and got carried away with the correction maps. It will fire off, but will not idle. RPMs fluctuate 3-4 times and it dies. Tried to undo what I did after 6~ flashes. What am I missing? Erics 2005 Cummins.hpt No Idle.hpl
Had too many last night and got carried away with the correction maps. It will fire off, but will not idle. RPMs fluctuate 3-4 times and it dies. Tried to undo what I did after 6~ flashes. What am I missing? Erics 2005 Cummins.hpt No Idle.hpl
Last edited by poulioteri; 03-04-2016 at 01:48 PM.
Try putting your Pilot Quantity ECT Coefficient table and your Pilot Timing ECTxIAT Coeffiient table back to stock.
Bingo. Those maps are important. Thanks Kill.
Update: boost PF map was also an issue.
Here's how to make sure that doesn't happen again. Every time you flash it, save it first. I use a name, date, and rev #. If I reflash a truck 6 times, I have 5 backup files with recent changes to fall back on and compare to.
I have found several ways to make these trucks have a no start and no idle condition lol.
2003 305/555 QCSB Cummins
Piston/rod/sleeve/fire ring/dual CP3/300 overs
Super Stick NV5600
S366/S480
Thanks guys. I will definitely start working logs that way.
SOLD - 05.5 3500 5.9 | G56 | CM848 ECU | HPT "Pretty Fast" Tune | FASS 95 | Custom 5in Intake | Straight 4in |
SOLD - 08 F450 6.4 | 5R110W | Modified | ? Tow Tune | Custom 4" |
New - 12 Ram 4500 6.7 | G56 | CM2200 | RaceMe | Straight 4" | K&N Drop in