Results 1 to 3 of 3

Thread: VE Table changes

  1. 03-07-2016 #1
    welder350fd
    welder350fd is offline
    Tuner
    Join Date
    Sep 2015
    Posts
    52

    VE Table changes

    I currently have an LQ4 with a TBSS intake, 90mm TB, comp 54-424-11 cam, ported 317 heads. I am going to be doing some idle tuning and stuff this week/weekend. since I am using a TBSS intake I thought it would be a good idea to start by using a 6.0 TBSS Tune as a base (right now I am using a '99 2500 6.0 tune). trying to see differences in the VE table to try and make the '99 tune = the TBSS VE table but they are in a different format (see pics attached). is there some type of conversion for this? i dont think my stock tune is going to like thousands of %? anyone else run into this issue? thanks.
    Attached Images Attached Images
    Reply With Quote Reply With Quote
  2. 03-07-2016 #2
    5FDP
    5FDP is offline
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,571
    Just use your tune and change the VE table as normal.

    The TBSS is also a gen 4 motor and a different compresssion ratio aswell if I remember right.
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.
    Reply With Quote Reply With Quote
  3. 03-08-2016 #3
    welder350fd
    welder350fd is offline
    Tuner
    Join Date
    Sep 2015
    Posts
    52
    Ok. this is the first engine I am tuning with help from a friend who is also relatively new to tuning. Just figured it would be a better place to start from.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »