hello, I successfully tuned the engine of a cherokee 2012 but I really want to tune the shiftpoints of the transmission there is nothing to change at the transmission window, is there something I can do?
[Specific Controller]
Dodge NGC4A, T00EM1822WULBX, (Dodge: 2)
[Specific Vehicle]
2005 Hummer H2 (8 cyl), 0NA0JVA25038, (GM: 2)
2007 Chevrolet Impala (8 cyl), 86YNNZM07068YXM0, [Barton efi], (GM: 2)
Id: 1155115152
Hardware: 0121
Firmware: 0120
PartNumber: 0000006220
BuildDate: 01/12/2010 12:00:00 a.m.
InterfaceOnTime: 2.12:16:23.8450000
ROM: 00 3F 00 81 00 01 00 00 FF
Config: CC 88 00 00 00 40
System Info: F7 00 00 00
Comm Errors: 00 00 00 01 80
SPI Info: 30 15 FF FF 4E 41 00 00
VehicleConnectedTime: 2.12:16:23.8450000
DetectedProtocols: CAN
SAE J1979 Info: CAN, 500 kb/s, Standard 11 bit, 500 kb/s, ECM: 7E8
ECM: 7E8, CAN, PCM -PowertrainCtrl
VIN: 8Y8RJ4BT7C1109922 - 2012
Calibration IDs: 68145944
Calibration VNs: 30625ABE
Basic PIDs: 38
Trouble Codes:
Scanning Methods: ISO 15031-5 Mode 0x01 Functional, ISO 15031-5 Mode 0x01 Physical