Originally Posted by
06300CSRT8
Stoich is stoich, I wouldn't try to tune it the way you have. Looks to me like you are just bumping up against your FA Max limit (set to 0.103 in ENGINE>FUEL>GENERAL tab). You are commanding 0.120 at times after 5200 but most you are going to be delivered is your max.
Further to Trailblazin recommendation on rescaling your VE table, you should especially do this to your FA Power Enrich table. Right now you have that set to max at a 1.50 pressure ratio even though you are well over 2.0. Again, youre just riding on the bottom row and tossing out the rest of the table this way.