-
Tuner in Training
Autostick keep shafting
Hi I have 3.6 challenger sxt .. even when im using autostick on the 1st gear its keep shafting to the 2nd then 3rd
but my friend challenger 2014 sxt when he using autostick on the first gear she keeping it on the 1st just like an R/T
so what I have to change
this is my tune file thanks 4 help
mu.hpt
-
setting under
trans
auto shift properties
general
autostick
change those settings and test
-
Senior Tuner
Theres actually two spots to change this.
Trans>Auto Shift Properties>General>Autostick>Auto Upshift> set this to "Disable"
But you also have to make sure your TCM limit isn't kicking in before your engine rpm limit. Looks like your engine rpm is set to 6,600 and your TCM limit is 6,400. So basically even in autostick when setup this way, your TCM is going to force a shift when you hit 6,400. Either lower your engine RPM limit below your TCM limit or raise up your TCM limit (what I suggest). Trans>General>TCM RPM Limit, all your ECT and EOT tables as well.. Make that 6800.