I down load the VCM, save it..... modifiy it (inj. base), save it.... then try to upload it to the VCM...... it gets to step 4, Preparing VCM...... and says Failed (Unable to determine correct boot loader)
This is on a car running the GM S/C reflash, if that has any impact on it.
please e-mail us a vcm suite info log while connected to the vehicle.
We got this guy Not Sure, ...
email sent (with vcm info log attached)
having same problem, what was the fix? if any
2006 cobalt (no more turbo)
m62 2.7 pulley, E85, 79lb/hr injectors, 4-2-1 longtube header, airbox mod, stock catback
1998 Trans am 5.3 iron block 317 heads 88mm turbo e85 105lb/hr injectors, twin 255's.... build in progress
2014 wrx mild tune 18psi pump gas
The fix is exactly what the error message says..
E-mail the vcm suite info log to support.
We got this guy Not Sure, ...
already did
2006 cobalt (no more turbo)
m62 2.7 pulley, E85, 79lb/hr injectors, 4-2-1 longtube header, airbox mod, stock catback
1998 Trans am 5.3 iron block 317 heads 88mm turbo e85 105lb/hr injectors, twin 255's.... build in progress
2014 wrx mild tune 18psi pump gas
fixed thank you
2006 cobalt (no more turbo)
m62 2.7 pulley, E85, 79lb/hr injectors, 4-2-1 longtube header, airbox mod, stock catback
1998 Trans am 5.3 iron block 317 heads 88mm turbo e85 105lb/hr injectors, twin 255's.... build in progress
2014 wrx mild tune 18psi pump gas
Reply With Quote