Looking for a little advice. 6.4 running 1200cc inj, a srt4 2 bar map, and twin precision 61. I have scaled the injPWxFuel mass and fuel mass xInjpw per the sticky.My question is what needs to be scaled for the 2 bar map? I have done the Pratiomax turbo to 2.0,Map linear to 46 kpa, MAP offset to 6.90kpa, MAP offset to .11v. What else needs to be addressed to get it running? Been reading up but compared to GM there isn't nearly the amount of info. Any help is greatly appreciated.