Manual High Idle

[poulioteri]

Can't seem to get the high idle feature to work. Tried a few different things.

[2007 5.9]

Manual Trucks need to have a specific pin on teh ECM grounded to work.

Google is your friend for the exact pin, as I dont remember it.

[TJ2000]

Can't seem to get the high idle feature to work. Tried a few different things.

are you having trouble using it or loading it?

[poulioteri]

are you having trouble using it or loading it?

Using it.

Manual Trucks need to have a specific pin on teh ECM grounded to work.

Google is your friend for the exact pin, as I dont remember it.

Thanks Les

[Turbo_Mike]

I did the pin down at the ECU on my early 04 truck, but I found this that I wanted to try for my other truck.

http://carbonitecummins.com/Documents/High%20Idle.pdf

[Bamofo]

I did the pin down at the ECU on my early 04 truck, but I found this that I wanted to try for my other truck.

http://carbonitecummins.com/Documents/High%20Idle.pdf

And before everyone goes out to their truck and tries to find that green wire... its not on all trucks... SURPRISE!!!.. I looked for hours a year ago to find it... doesnt exsist.

Pinout when i find it will be provided.

[poulioteri]

I did the pin down at the ECU on my early 04 truck, but I found this that I wanted to try for my other truck.

http://carbonitecummins.com/Documents/High%20Idle.pdf

I saw this on John's (flopster843) website too. Was hoping it was just that easy, but... It's not, on mine at least.

[poulioteri]

From what I'm finding. Pin 22 on ECM connector B...? In the service manual page 8W-80-98: CAV 22 - PTO switch sense

And a pin pigtail: 3164263

[poulioteri]

Got the manual idle to work. But can't seem to make a difference on the settings. It always hits 1100 rpm after pressing set.