Config File

[kromberg]

I have managed to lose my config file that I have loaded into my unit. Is there any way to read out and save what it currently has loaded?

[Bill@HPTuners]

Unfortunately not.

[kromberg]

OK, I recreated the channels config file. Now when I write the config to the MPVI unit and press the record button, the error LED is now flashing. Is there any way to determine what the issue is? Other than adding parameters to the channels, saving the file, and then writing the MVPI config, is there anything else that needs to be done?

[kromberg]

I figured it out. After loading the saved config file after writing the config file, I noticed to parameters grayed out with the broken/disjoint mapping symbol. I removed those, wrote the config, and the MPVI unit is now working as expected. There should really be a trouble shooting entry for this.

[Keith@HPTuners]

This is not an issue if you're using VCM Suite 3.0 or newer.

[kromberg]

Ummm... yes it is. I am using the a 3.x version.

[Keith@HPTuners]

What version of 3.0?