Recently installed 392 hemi, comp cam 260 with 6.1 injectors. Ran basic tune adjusted transmission, idle, timing. Truck runs great. I havent done any injector tjning at all. Fuel trim data is in range and no codes. Im wondering if i should leave well enough alone or of there is any benefit in adjusting injectors? I have years of wxperience tuning Ford with CMR and GM and ford with some hp tuners. Never tuned dodge prior to this and i have no 6.1 injector data to use for my tune so im not sure i should mess with this at all. From my understanding after reading the forum here it is nothing like tuning the Fords and GM's i used to tune in my former shop. Also want to mention i am quite rusty at this. Advice?