PID for 2013 Camaro SS AC Pressure line

[SVT_Z06]

Does anyone know the PID for the A/C pressure line for a 2013 Camaro SS? Trying to setup a wideband through it. Thanks!!!

[schpenxel]

V3 or 2.24?

V3 makes it easy--you can just search for it

[SVT_Z06]

V3. I currently have 7101 for my vette. Is it the same for all pcms?

[schpenxel]

Just connect to vehicle (or switch to that profile if you've connected to it before) and use the variable editor to find out real quick. Once you've switched to that vehicle profile it will only show parameters that apply to that vehicle.

So open math parameters, click on the math parameter you want to edit on the left. On the right, click inside of the parameter that you're currently using for AC voltage. Hit edit variable, click on "AC pressure" or whatever it's showing beside of parameter. Search for AC pressure or AC voltage or whatever it is you need to use.. double click on it and it'll update to the right one for that vehicle, if it's any different.

I checked 3 vehicle profiles and all of them were showing 7101 for AC pressure voltage, so I'd bet what you have already is just fine.

[jcmg8]

Does anyone know the PID for the A/C pressure line for a 2013 Camaro SS? Trying to setup a wideband through it. Thanks!!!

Have you considered the AEM 30-0333 wideband? It's new and will drop the WB on the canbus, no need to backdoor the signal.

Here are some threads:
http://www.hptuners.com/forum/showth...hlight=30-0300

http://www.hptuners.com/forum/showth...hlight=30-0300

[mowton]

How to Interface a Wideband to a Standard MPVI

Ed M

[SVT_Z06]

Thanks a million, guys. I already had it working for the vette for a while now. I just thought it was different for all other vehicles. Thanks again for the responses, Ed, jcmg8, schpenxel.