Results 1 to 11 of 11

Thread: Help Urgent

  1. 05-30-2016 #1
    maxchevy2004
    maxchevy2004 is offline
    Tuner
    Join Date
    Jan 2015
    Posts
    72

    Help Urgent

    I just flashed a 2009 Ram 1500 5.7 flashed no problem did key cycle no start truck tryed re reading and flashing and will not re read or flash
    Attached Files Attached Files
    Last edited by maxchevy2004; 05-30-2016 at 10:00 AM.
    Reply With Quote Reply With Quote
  2. 05-30-2016 #2
    MarkTucker
    MarkTucker is offline
    Advanced Tuner
    Join Date
    Dec 2014
    Location
    Palmetto, FL
    Posts
    874
    Does your battery have a good charge?

    The read looked to have fail?
    Checksum Fail.png
    Reply With Quote Reply With Quote
  3. 05-30-2016 #3
    maxchevy2004
    maxchevy2004 is offline
    Tuner
    Join Date
    Jan 2015
    Posts
    72
    Battery is good. l tried to re read it after l flashed it with the error message.
    Reply With Quote Reply With Quote
  4. 05-30-2016 #4
    MarkTucker
    MarkTucker is offline
    Advanced Tuner
    Join Date
    Dec 2014
    Location
    Palmetto, FL
    Posts
    874
    So what file did you flash it with?
    Reply With Quote Reply With Quote
  5. 05-30-2016 #5
    maxchevy2004
    maxchevy2004 is offline
    Tuner
    Join Date
    Jan 2015
    Posts
    72
    l contacted support no response as of yet. Very strange it flashed no problem did key cycle yet know no start and wont even communicate with PCM flash or read. Battery is good I used HPT to flash truck
    Attached Files Attached Files
    Last edited by maxchevy2004; 05-30-2016 at 10:58 AM.
    Reply With Quote Reply With Quote
  6. 05-30-2016 #6
    MarkTucker
    MarkTucker is offline
    Advanced Tuner
    Join Date
    Dec 2014
    Location
    Palmetto, FL
    Posts
    874
    HPT most likely wont respond until tomorrow, being today is a holiday.

    But what file did you use to flash the truck with(when it stopped working)? Did you use the file that you have attached in you original post? Or is that the file you get when you try to do a read?
    Reply With Quote Reply With Quote
  7. 05-30-2016 #7
    maxchevy2004
    maxchevy2004 is offline
    Tuner
    Join Date
    Jan 2015
    Posts
    72
    The file flashed in no issues 100% did the key cyle as asked on screen. l used the modified file l just posted. l tryed the original know that wont even flash in
    Reply With Quote Reply With Quote
  8. 05-30-2016 #8
    MarkTucker
    MarkTucker is offline
    Advanced Tuner
    Join Date
    Dec 2014
    Location
    Palmetto, FL
    Posts
    874
    Checksum Fail.png
    So you are saying that this file right here^^^^, is the file you flashed into your truck? And now won't start?

    Has this PCM been flashed/tuned by any other programmers/tuning softwares? Before you attempting to tune it?

    It looks like your PCM is done now. You can wait and get a response from HPT tomorrow, but most likely you are going to need a another PCM now.
    Reply With Quote Reply With Quote
  9. 05-30-2016 #9
    uarperformance
    uarperformance is offline
    Advanced Tuner uarperformance's Avatar
    Join Date
    Apr 2007
    Location
    Largo
    Posts
    255
    Did you try flashing it back to stock. May need J TOOL OR Wyotech to try and reflash to stock
    Reply With Quote Reply With Quote
  10. 05-31-2016 #10
    maxchevy2004
    maxchevy2004 is offline
    Tuner
    Join Date
    Jan 2015
    Posts
    72
    The HPT file flashed in no problem 100% did key cycle no start. Still waiting on tech support will keep you updated.
    Reply With Quote Reply With Quote
  11. 06-06-2016 #11
    rcts
    rcts is offline
    Potential Tuner
    Join Date
    May 2012
    Location
    Calgary, Alberta
    Posts
    4
    So what has happened???
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »