Channels Missing In VCM Scanner 2009 LNF

[Mongorat427]

When I load the RPT file everything shows. After the log its not showing properly in the log. I updated 3.0 several times to no avail. Running Windows 8 on a fast Laptop. Anyone else having this problem ?

[Keith@HPTuners]

It's hard to understand what your issue is. Can you be a little more clear?

Also, what channels are missing? How do you know they are missing?

[Mongorat427]

It's hard to understand what your issue is. Can you be a little more clear?

Also, what channels are missing? How do you know they are missing?

I contacted my tuner James Rakes to find the exact issue. When I load the RPT file he sent me it only works now and then even though I update 3.0 daily. I took screen shots and everything looks good but when I log its all wacked out. Thanks Mongo

[Mongorat427]

Quote from James Rakes ( Your channels are not functioning. My channels I sent you are not in the channel setup.

Put the channels in and layout and log it. But take a pic of it logging )

[Keith@HPTuners]

Without files, or screenshots, it's really hard to understand what the problem you are having is.

I don't know what "all wacked out" means, specifically.

[Mongorat427]

Quote from James Rakes ( Your channels are not functioning. My channels I sent you are not in the channel setup.

Put the channels in and layout and log it. But take a pic of it logging )

[Mongorat427]

Screenshot (1).png

[Keith@HPTuners]

Looks fine. You're not really describing your problem very well.

[Mongorat427]

Looks fine. You're not really describing your problem very well.

I attached a file

[Bill@HPTuners]

scanner log looks fine to me.

[Mongorat427]

scanner log looks fine to me.

But it does not match the RPT file James Rakes has me load into the scanner. How can I upload the rpt file for you to look at

[Keith@HPTuners]

It looks like there's more parameters in this channel config than are supported by your vehicle. That seems to be the problem.

Not all vehicles support the same parameters.

Also, this guy has WAY too many parameters in there. It will slow down your data rate considerably.

[schpenxel]

I'm pretty sure he's logging every available parameter at this point, lol

But yeah.. Keith already got it. A lot of stuff he's trying to log doesn't even exist on some (many) vehicles