With the release of VCM Suite 3.2, 545RFE/65RFE Transmission tuning is supported! This brings transmission support to many more supported vehicles including, but not limited to:
- 2007-2012 Dodge Durango
- 2007-2010 Jeep Commander
- 2007-2014 RAM 1500
- 2007-2011 Dodge Dakota
- 2007-2013 Jeep Grand Cherokee
Adjustable parameters include, but are not limited to:
- Shift Points (All available driving modes)
- Shift Pressure
- TCC Apply/Release
- Torque Management
We worked very hard to get RFE parameters added for most, if not all, ECM operating systems currently supported by VCM Suite 3.2. If your vehicle is currently supported by VCM Suite and you want to tune your RFE Transmission, just update your software to VCM Suite 3.2!
If you have a 2007 or newer Chrysler/Jeep/Dodge/RAM vehicle equipped with a 545RFE/65RFE transmission and do not have transmission parameters available, make sure you are using VCM Suite 3.2. If you are using VCM Suite 3.2 and you still do not have transmission parameters or you get a "Definition Failed to Load/Validate Checksum Failed" error, please contact support. Make sure to include your .HPT file and a VCM Suite Infolog in the email to support.
Thanks!