Results 1 to 4 of 4

Thread: How to setup Wideband??

  1. #1

    How to setup Wideband??

    I just updated to 3.2 Scanner and im trying to add my wideband to my scanner and I cant figure it out. Will someone please walk me through how to add my wideband so I can scan properly. I have a PLX wideband and have a Hptuner Pro.
    2003 Galaxy Silver Limited Edition GTP
    Mods: 2.8 MPS | S2IC | XP CAM | GEN V | 65# | E85 | TOGS | N* TB | HPT PRO | Impala Brakes | BUILT TRANS w/3.29 GRS

    2017 Chevrolet Silverado LTZ 6.2
    Mods: HPT PRO

  2. #2
    Senior Tuner mowton's Avatar
    Join Date
    Mar 2007
    Location
    Florida
    Posts
    3,773
    Top of this Scanner sub-forum is a sticky with graphics and video How To's.....http://www.hptuners.com/forum/showth...tarted-Threads

    Here is the Wideband Video link...Subscribe and Like please....

    https://www.youtube.com/watch?v=3TQdrTMnljI

    You can either leave as pre-configured or contimue to establish a user defined where you will be able to tweak the offset value to compensate for variances due to ground/analog offset issues. Also you can select AFR or Lambda, which I recommend.

    Ed M
    2004 Vette Coupe, LS2, MN6, Vararam, ARH/CATs, Ti's, 4:10, Trickflow 215, 30# SVO, Vette Doctors Cam, Fast 90/90, DD McLeod, DTE Brace, Hurst shifter, Bilsteins etc. 480/430

    ERM Performance Tuning -- Interactive Learning ..from tuning software training to custom tunes
    HP Tuners Dealer- VCM Suite (free 2hr training session with purchase), credits and new Version 2.0 turtorial available
    http://www.ermperformancetuning.com
    http://www.facebook.com/ERMPerformanceTuning

    [email protected]

  3. #3
    Moderator
    Join Date
    Mar 2014
    Location
    Raleigh, NC
    Posts
    6,347
    Quote Originally Posted by Lumpo View Post
    I just updated to 3.2 Scanner and im trying to add my wideband to my scanner and I cant figure it out. Will someone please walk me through how to add my wideband so I can scan properly. I have a PLX wideband and have a Hptuner Pro.
    Short version is add the MPVI input to your list of channels, right click, transform, find the WB and units you're using (I'd recommend lambda) and apply the transform.

    To use the WB data in a chart/graph you'll want to search for "PLX" when adding a parameter, NOT the MPVI pro input #
    Post a log and tune if you want help

    VCM Suite V3+ GETTING STARTED THREADS / HOW TO's

    Tuner by night
    CPX Tuning
    2005 Corvette, M6
    ECS 1500 Supercharger
    AlkyControl Meth, Monster LT1-S Twin, NT05R's
    ID1000's, 220/240, .598/.598, 118 from Cam Motion

    2007 Escalade, A6
    Stock

  4. #4
    Potential Tuner
    Join Date
    Mar 2019
    Posts
    5
    Hi, i have the Zt-3 wideband setup and using hptuners vcm scanner i can get a reading but it doesn't change even though the dial is changing all the time. It's reading afr as is the channel in the scanner. What is wrong do you think?
    Cheers