11-14 F-150 Ecoboost Mega Update

[Eric@HPTuners]

Tomorrow's build of VCM Suite 3.2 includes the big update I have been working on for the 2011-2014 F-150 Ecoboost.

In total there have been 137 new parameters added to the editor. Some of the things added include the following:

Exhaust Backpressure model
Turbo Model
Misc Torque and Load Limits
Adaptive Knock / Octane Adjustment
Coil Output
MAP and TIP Sensor limits
Shift Schedules (PTO Mode, ABS, Offroad, CR, and Fast Downshift)
Alternator Output

The scanner has 5 new parameters for logging:
Boost Pressure
Inferred Octane
Knock Preignition Modifier
Knock Octane Modifier
Knock Learned Average

I will be updating other vehicles we already support as well in a future update.

[zfgracing]

Can we log injector duty? I think it's missing but haven't looked in a while?


And thanks for the hard work I can't wait to go play!

[mechanicboy]

Is this applied to the 15+?

[Eric@HPTuners]

Is this applied to the 15+?

Not yet, but will be in a few days.

[smallblock500]

enough support for the .16 eco boost to be worth buying the credits yet? mainly looking to turn down some of the torque management and turn the boost up a little down low to help get this pig out of the hole like the 2.7s do.

[LastPlace]

dont do it.

[zfgracing]

Injector duty anyone? Is anyone able to log that?

[LastPlace]

nope

[smallblock500]

dont do it.

Don't do what?

[LastPlace]

spend credits yet for the 2016

[Eric@HPTuners]

Injector duty anyone? Is anyone able to log that?

I'm adding pulsedwidth and injection mode today. You can calculate duty cycle based on that, but depending on the mode that can get a little complex. Multiple injections makes things fun.

[LastPlace]

Keep Em coming!

[Eric@HPTuners]

OK, tomorrows build has injection pulsewidth and Injection Mode for all 11-14 Ecoboost F-150s.

[LastPlace]

Bump for the 15+ Mega update