Spark tables not doing was is commanded

[ls1pr]

I raised the spark tables for WOT and does not goes to the commanded value. I runing with race gas to avoid any pinging.

- raised the value on the WOT Base an PT Base
- Less timing on the IAT Spark
- Throttle Rate Spark table moved to 0
- Knock Threshould disinterested the knock sensor

Eg I commanded 26 grades at WOT and I'm seen 20 grades

Any ideas

[GPGTP]

paste a scan and tune or you probably wont get a response

[ls1pr]

Thanks you got a point
Ortega(Mod17).hpt

Hellcat Datalog 5.hpl

This are the cat .hpt and log file any help will apreciated

[B00STJUNKY]

Looks like it's staying in closed loop control even when you have the pedal matted. I also notice you're not logging aircharge, so it's hard to reference the tables without that variable.