Hey I'm new to this and need a bit of help learning the settings. I've put a 2010 FG n/a Barra into a Nissan Patrol and need some tips for setting up the pcm correctly.
I have it running/ drivable but it still needs some tweaking with the following:
-I keep getting returning fault codes for the rear O2 sensor, and the EVAP purge circuit. How do you disable them correctly, because the settings I have used don't seem to have worked.
-The cooling fans run as soon as the engine is started. They are off when the ignition is on, but come on when the engine is started.
-How do make the accel pedal more sensitive at low speed/ takeoff. My pcm is from the ZF 6 speed, and now the engine is bolted to a manual. It stalls easily because the pedal seems a bit unresponsive.
-The dashpot needs to be bumped up a bit, but I'm unsure about what I need to change in the menus.
-Referring to the VCM scanner, my engine appears to only run in open loop with an O2 voltage of around 0.05V. How do I find out what is preventing it from going into closed loop.
Sorry if these are all retarded questions, but I can't find much help info for beginners. Everything I've found so far only covers the initial installation of the software.
Cheers in advance.